Machinery and Tools

on a scale of 1 to 10 it's a 23

with rope and blanks

This is an old Navy term, use to be while on board ship that this was the day to mend clothing and fix your shipboard hammock with needle and thread. Today it is a few hours granted to do personal chores.

Marijuana is a form of hemp. People have been making rope from the hemp plant from before the days of recorded history. You take three strands of the stems of the hemp plant and stretch them out. You put the three stems together and put an iron ring around them.You attach each one to the middle of a wheel. Then you spin all three wheels at the same speed in the same direction and it creates a hemp rope. You will need to move the iron ring in the process. The hemp in the marijuana stem is the same as any other hemp.

You might be referring to the simple or elemental machine known as the inclined plane.

The awesome Annie consists of a crougar (leg-over) then a toad (crougar with a cross/leg-over cross.)

A crougar is simply putting your arm under your same leg (as in left arm under left leg or vice versa) while lifting your leg up, turning the ropes, then jumping while keeping your hand under your leg.

A toad is like a crougar, but it is also different. Instead of putting your arm under your same leg, put your arm under your opposite leg (while lifting that leg up.) Then, with your other arm, cross it over your body as if you are hugging yourself. Just turn the ropes and jump after this.

For the awesome Annie, do one crougar, then do one toad, then repeat. You can also start with a toad then do a crougar if that is easier for you.

18mm

There is no hard and fast rule for this since all houses, systems, thermostat locations and comfort levels are different. Experiment and go with what makes everybody happy most of the time.

Yes, and add 30 and 60 degree offset too while you're at it. First off, if you work on cars, one type of wrench won't cut it. You need an assortment of different lengths, depths, and types.

A hammer is robust enough that it doesn't require any special care.

The application of a screwdriver is to rotate and turn screws in or out of materials

Foot ball player

You can try ebay.com for afforable and various sizes.

A scroll saw can do this.

The ball peen hammer has a wooden shaft, generally 12 " long,and a steel head with a round flat face for hitting nails and on the opposing end an elongated face of about 1/8 wide, 1/2 long. This part is the peen, and is intended for striking tacks and other small nails with large heads.

It's a special tough drill that fits rotary hammer drills like Hilti and Bosch.

Not necessarily, there is no reason to discard as long as you grind off bits thatmay come loose when hit.

upper clamb

We don't have list of everybody's prices. Phone a few tool stores and ask is the best way.

You use a 16 mm or 5/8 wrench.

By checking how deep the rope is in the water.

A device from the Doctor Who franchise that is long, thin, and has the ability to unlock doors, scan computers, detect signals and more.

They get dirty and restrict the air flow.

The set screw works by turning it, usually with an Allen wrench, but sometimes with a flat screwdriver. Turning it inwards (Clockwise) brings it's flat head against a shaft to hold it in place. These are commonly used to hold pulleys or other wheels onto metal shafts or rods.

No you need not adopt the unique furnaces, but that doesn't necessarily mean that you had best actually undergo with it once. Furnace Filters, Air Conditioning Filters at Air Sponge Filter Company