"One bad thing about plastic is its bad for the enviroment. You should use reuse able things that isn't plastic. Most wastes biodegrade (compost) but plastics do not."
Plastic is not inherently "bad for the environment", it depends entirely on how you manage your plastics waste. If you carelessly go around throwing plastic bags and empty plastic containers onto the ground, then of course it's a problem. If you collect and recycle them then there isn't a problem. Synthetic plastics in the environment basically just sit there - they are not intrinsically toxic or harmful.
The comment "most wastes biodegrade but plastics do not" is complete nonsense. Firstly, plastics DO biodegrade, they just do it very slowly. Also, if you place paper (recycled paper or any other type) into a landfill site, THAT will not biodegrade for years either. The reason is simple - biodegradation requires oxygen, and the inside of landfill sites are basically oxygen-free. No bugs can survive there, so no paper can degrade.
The whole "use paper cups, they're more environmentally friendly" thing is pseudoscientfic claptrap. They key point is the way that you handle and manage the waste, not what the waste is made of.
Polyacrylonitrile, Acrylonitrile butadiene styrene
When a shape memory polymer is used to stitch a wound loosely, the temperature of the body makes the thread tighten and close the wound, applying just the right amount of force. This is an example of a 'smart' polymer. i.e. one that changes in response to changes around it. In this case a change in temperature causes the polymer to change its shape. Later, after the wound is healed, the material is designed to dissolve and is harmlessly absorbed by the body. Hope this helps:)
It is dangerous because of the dangerous gases that form from polymers in the burning process. When polymers such as plastics are burned carbon containing gases are released. During the burning process, the carbon combines with oxygen present in the atmosphere & forms oxides of carbon.
These gases have been linked global warming, depletion of the ozone layer, acid rain,etc. They create harmful effects on our ecosystem.
It depends what type of polymer it is - if you're talking about polyethylene or polypropylene for example, the only gases you will generate are carbon dioxide and water vapour. These are not "dangerous" - yes, they are linked to climate change, but then you would get exactly the same gases by buring paper or wood.
Absoutely not because there are major advancements in the recycling of plastics as a reusable good. Paper causes way more of a negative impact on the environment. Check out http://www.millerpolybags.com/ to see how were working on being environmentally sound.
What is Polymer concrete?
It is also known as resin concrete because synthetic resins are used instead of cement in its manufacturing.Density of cement concrete
Density of polymer concrete
Kevlar (Aromatic Polyamides) is used in tire reinforcement.
Polybutadiene (Butadiene Rubber, BR) is used for the carcass and side wall.
Natural rubber is a polymer, and they put polyurethane in tire rubber too. While aramids like kevlar are often used in car and motorcycle tires, nylon (less expensive and works fine) is used in bicycle tires.
EPE, also known as pearl cotton, is also a new type of environmentally friendly material. It overcomes the shortcomings of traditional styrofoam, such as fragile deformation and poor recovery, and has the characteristics of shock resistance, water and moisture resistance, and recycling. It also has Good chemical resistance, becoming a substitute for traditional packaging materials
Polymers form by the combining of a large number of "monomer units". This can occur in two major ways, by addition polymerization or condensation polymerization.
Addition polymerization deals with monomers of the same type of functional group with at least one double or triple bond. Condensation is for monomers that are differing with at least two separate functional groups.
Well, physically, you can, but it's not a good idea. Water bottles are not made for hot liquids. They leach chemicals such as BPA which have been associated with autism and cancer.
Straws are an easy target for environmentalists because they are so prevalent and because they're simple to replace or forgo.
Because they're so small and are often made of multiple types of plastic, single-use plastic straws usually can't be recycled. Because of this, it's estimated that Americans alone use upwards of 100 million straws per day (the often-cited figure of 500 million per day has been disputed, but not by much).
Activists have found it relatively easy to convince people to decrease their straw use—some restaurants have started asking if customers want a straw with their drink instead of giving them out automatically. Those restaurants have seen a 50 to 80 percent reduction in single-use plastic straws—that's a big result from a pretty simple fix.
Not only is it fairly easy to get people to cut down on straw use, but there are also a multitude of more eco-friendly options on the market, like reusable stainless steel straws or biodegradable paper straws.
All in all, it's not really about hating the concept of straws or thinking that straws are a worse form of waste than any other single-use plastic item. It's more about the relative ease of convincing people to limit their straw use or switch to alternative types of straws.
However, modern plastics are moulded / extruded in forms which may be porous whle appearing to be solid.
The five monomer units, or nucleotides, of nucleic acid are Adenine, Cytosine, Guanine, Thymine and Uracil.
Plastic is man-made. It's a hydro-carbon compound.
crystalized oxalic acid.....10 parts water to 1 acid...dissolve and soak till rust is gone. This substance is poisonous so be careful and insert with hypodermic syringe if necessary...rinse carefully
If you're talking about candle wax, it is not a polymer. It is a mixture of large-chain alkanes, which are hydrocarbons. All other types of waxes are condensation polymers.
A polymer that is degradable by bacteria is called a bio-degradable Polymer.
Biodegradable polymers are used in medical devices to avoid a second operation to remove them.
Poly-Beta-HydroxyButyrate-CO-Beta-HydroxyValerate is an example of Bio-degradable Polymer.
Polymers are any number of compounds consisting of millions of repeating units. Monomers are related because they're the building blocks of a polymer.
The monomers of protein are amino acids. There are 20 common amino acids. Some of the most common are Alanine, Glycine and Leucine.
Emulsion, Solution, Suspension, Addition and Condensation polymerization.
All microwave-safe cookware can be washed in the dishwasher, but follow manufacturer's label or guide instructions on where to place it--top rack only, or either rack. Or wash by hand in regular mild dishwashing liquid. Never use heavy duty mesh cleaners. If food remains after washing, use a plastic scrub pad. Never use scouring powders, scouring pads, or other abrasives.
If stains are left by berries or tomato products, put into utensil solution of 1 tablespoon chlorine bleach in 1 cup water (never any stronger!) and soak 1-2 minutes. Rinse thoroughly. [Info from the Home Maintenance And Repair Database at the Michigan State University website] WASH THEM WITH LIQUID SOAP -DRY IN SUN -STAINS WILL VANISH
Clean with a baking soda paste - often this will remove excess grease and stains.
Noncrystalline thermoplastic that can come in many colours, weather and shatter resistant. It is used in many things such as acrylic nails, airplane canopies, display fixtures, advertising sign models, toys, light fittings, safety shields for machinery and many other useful items. i am the best
Acrylic plastic refers to a family of synthetic, or man-made, plastic materials containing one or more derivatives of acrylic acid. The most common acrylic plastic is polymethyl methacrylate (PMMA), which is sold under the brand names of Plexiglas, Lucite, Perspex, and Crystallite. PMMA is a tough, highly transparent material with excellent resistance to ultraviolet radiation and weathering. It can be colored, molded, cut, drilled, and formed. These properties make it ideal for many applications including airplane windshields, skylights, automobile taillights, and outdoor signs. One notable application is the ceiling of the Houston Astrodome which is composed of hundreds of double-insulating panels of PMMA acrylic plastic.