0
Yes, the bale size on the New Holland 849 round baler with auto tie is adjustable. Operators can set the desired bale diameter using a simple control system, allowing for flexibility depending on the specific needs of the operation. This feature helps optimize the baling process for different crop types and conditions. Always refer to the operator's manual for detailed instructions on making adjustments.
What else can I help you with?
Can you bale silage with a string baler?
Yes.
How do you eject bale from 4760 baler?
Lift the back end up and get the baler belts moving to expel the bale, all using the controls from the tractor seat.
How to make tighter bales on New holland 630 baler?
Reduce ground speed while maintaining engine RPMs which amounts to a lower gear. Weave from side to side making an even bale.
How many flakes are in a bale of hay?
Since a "flake" is the amount of forage compressed in one ramming cycle of the baler, this is completely variable depending on the quality and kind of hay, the size of bale produced by the baler, and other factors as well. I've seen as few as eight flakes in one bale, and as many as thirty.
How is a round hay bale made?
With a round hay baler. The baler is powered by the tractor through the PTO, an electrical control box, and hydraulics, which enables the operator full control over the baler. The tractor moves along the swath of hay, and the revolving pick-up cylinder picks up the swath and moves it into the baler chamber. In the baler chamber, the chains or belts move like a constant pulley system (there is more than one: bottom, top, and the two sides) rolling the hay, as it enters the chamber, into a cylinder. The cylindrical hay bale grows until it cannot expand anymore inside the baler. The size limit sensors in the baler go through to the control box in the tractor, often through audio alert, and the operator either keeps going until he can judge when the bale is big enough and/or until he sees it is nice and tightly packed enough inside the baler to let stop and let it out. But, before he lets it out, he has to stop first and, with the control box, apply the strings or netting to the bale. There is no need to worry about tying, as the baler machine does it automatically. Once the bale has been entwined (literally), the tractor and baler powers down, stopping the movement of the belts and pick-up wheel in/on the baler, then the operator lifts the back end of the baler (with the control box in the tractor of course, not manually), and initiates the belts or chains to eject the bale out of the baler. The back door closes, the baler power ups again, and resumes creating another bale. This process repeats until the operator has to quit because of one of four things: 1) the baler gets plugged up (most commonly in the pick-up shaft) 2) it starts to rain 3) it gets too late in the evening and the hay starts to, what we call, "toughen up." 4) he finished baling up the hay field
What size bale does an international 241 hay baler make?
5ft wide 3 to 6ft round
What size bale does a Massey Ferguson 560 baler make?
5 foot X 6 foot
How does a hay baler work?
hay is picked up by a the pickup tines, then pushed perpendicularly by a "fork". it is then compacted into slabs by the plunger and tied with twine by the knotters. the bale then comes out the back of the baler.
How many flakes in a bale of hay?
Since a "flake" is the amount of forage compressed in one ramming cycle of the baler, this is completely variable depending on the quality and kind of hay, the size of bale produced by the baler, and other factors as well. I've seen as few as eight flakes in one bale, and as many as thirty.
Why are bales of hay scattered?
Because the baler usually just drops them in the field at the particular location where each bale is completed and the next one begun.
How much horsepower for a hay baler?
It depends on the size of the baler. A 50 horsepower tractor is sufficient for a 90 pound bale size machine, while a big round bale machine needs closer to 100 hp. The full-size 4 foot by 4 foot by 8 foot 2,000 pound bales work most efficiently on a 150 to 200 hp tractor.
How do you adjust the tightness of the bales on a NH 846 round baler?
To adjust the tightness of the bales on a New Holland 846 round baler, you typically need to modify the tension on the bale chamber. This is done by adjusting the tensioning bolts or knobs, which control the amount of pressure applied during the baling process. Increasing the tension will create tighter bales, while decreasing it will result in looser bales. Always refer to the operator's manual for specific instructions and recommended settings for your model.
