30 degrees dwell
a 1973 Chevy truck has HEI Answer And if it does have points, say not the original engine, its .018-.019 will do.
If you set the points at 30 degrees you will be fine.
According to my Chilton's Auto Repair Manual : The 351 Cleveland engine has single points and the 351 CJ engine has dual points in 1973
26-30 degree dwell or adjust points to .017 with a feeler gauge.
what is the torque setting 1973 FORD F100 360 engine . for my heads and manfuld thanks
The firing order for a 1973 corvette 350ci and the optional 454 is 18436572 Firing order remains the same for breaker point ignition as well as HEI electronic Position of #1 plug wire on distributor cap changes slightly when converting to HEI from a standard breaker point ignition system...............sfvrider242
Kit available at auto parts w/instructions
The Ford C6 uses engine vaccum to sense the shift points. In a diesel engine setup there is a vaccum regulator to accomplish the same thing as in a gas engine.
The ignition timing for a 1973 AMC 360 engine is typically set at 4 to 8 degrees before top dead center (BTDC) at idle, with the engine running at approximately 600-800 RPM. However, it's important to consult the specific service manual for your vehicle, as timing may vary based on factors like emissions equipment and any modifications made to the engine. Additionally, ensure to check the timing with a timing light for accurate adjustments.
your drive selector arm inside your engine bay is not in the complete upright position . pull it up and your key should slide out
1973
the gap on the distributor points is .016, the timing is advanced 4 degrees and the spark plug gap is .030