Go to http://www.havuz.org/pool-calculators.htm
18,770 Gallons or round it up to 20,000 for calculation purposes.
width X height X the average of the depth X 7.5 just to give you an idea most pools in Florida are 10k - 15k gal (inground) above ground just use square pi's :-)
Cannot be answered with only these measurements. You need to specify what shape the pool is. Also, for a rectangular pool, the length, width and depth are needed. For a round pool, the diameter and depth are needed.
To calculate the volume of a 16x32 pool, you need to multiply the length, width, and average depth. Assuming a standard depth of 4 feet (1.22 meters), the volume in cubic feet would be 16 x 32 x 4 = 2,048 cubic feet. Since 1 cubic foot is approximately 7.48 gallons, this equates to about 15,344 gallons. Since 1 gallon is approximately 3.785 liters, the pool would hold around 57,979 liters.
It depends on the depth of the pool as well as other factors. There are many variables other than just the outside length and width when it comes to a kidney shaped pool.
L x W x avg. depth x 7.5
Here is the formula for calculating gallons of water to fill a swimming poolCalculate Your Pool's Water VolumeOverview:In order to figure out proper doses of chemicals for your pool, you need to determine how many gallons of water it holds. To do that, you need to know four different numbers: the length, width, average depth, and a multiplier that determines gallons. Here is the formula:Length * Width * Average Depth * Multiplier = GallonsDetermine the Multiplier:Rectangle, square, or free-form pool:multiplier = 7.5.Round or Oval pool: multiplier = 5.9Determine the Average Depth:To determine the average depth in a pool where the bottom slopes, measure the shallow end, the deep end depth. Add them together and divide by two (2).Example: Shallow End = 2'. Deep End = 10'2' + 10' = 12'; 12'/2 = 6' Average Depth
The short answer is approximately 30,000 U.S. gallons is the capacity of a 20' x 40' pool. Determine your pool volume by with these easy to use formulas: Rectangular Pools: Length x Width x Average Depth x 7.5 = Gallons Oval Pools: Length x Width x Average Depth x 5.9 = Gallons Round Pools: Diameter x Diameter x Average Depth x 5.9 = Gallons Gregg Dietz <a href="http://www.dietzpools.com/">Dietz Pools &</a><a href="http://www.dietzpools.com/">Pool Supplies</a>
5300 gallons
length X width by avg depth x 4.5 if a rectangle
To find the answer to your question, multiply the length times the width times the average depth and multiply times 7.5. The answer is the number of gallons in a swimming pool.
Cannot be answered with only these measurements. For a rectangular pool, the length, width and depth are needed. For a round pool, the diameter and depth are needed.