The foregrip on the ion is the regulator.
First detach the macroline fitting and macroline itself from the bottom of your regulator. Then unscrew your regulator from the body of the gun (Make sure there is no air in the gun).
Take your new socktech regulator and screw it in to the body. Then reattach the macroline and fitting to the new regulator.
Yes, the Shocktech regulator has standard asa top threads and standard macroline bottom threads, which is what the ION uses
Where the air tank or co2 tank normally attaches
Yes. You can upgrade the barrel, the feedneck, the board, the regulator, the grips and the ASA.
The purpose of a paintball gun is to fire paintball pellets, to mark opponents in the game of paintball.
It allows you to attach the tank to a coil to your gun. You can carry the tank in a back harness which allows you to more properly use a stock.
To put a dynast paintball gun together, you need an Ion XE and a dynasty body kit. Unscrew the screws to the body and side out the cover of the bolt and regulator. Replace this with the Dynast Body kit and you are finished.
No. It does not have any rails, nor is it accurate enough to need one.
A paintball marker is a paintball gun. It is just called a marker instead of a gun.
No, do not expose your paintball gun to water.
No. The state of Ohio did not invent the paintball gun.
if your tank runs out take it to your locale paintball field thay should fill it up for you for a small fee exp=5$ unlimated air for the day at my field.
No tubes attach the gun and the tank. You might be thinking of o-rings which are rubber rings that create an airtight seal.