How many cubic yards in a ton depends on what your material is. For instance, topsoil has a 1:1 ratio. 1 cubic yard of topsoil would be 1 ton, so if you have topsoil, 17 cubic yards would be 17 tons. Gravel on the other hand has a 2:1 ratio. So, 17 cubic yards of gravel would be 34 tons.
There may be very little or even none . Topsoil and "dirt" are different substances
depends on the density
Approx 20 Cubic Yards of sea water = 1 ton Between 3 and 6 Cubic yards of Paper = 1 ton Hope this helps
Depends on the wood and the ton used. For example a metric ton of Canadian Pine would be about 2.5 cubic yards.
There is about 2800lbs in 2 yards of top soil.
5 cubic feet
three cubic yards.
11 cubic yards of planting mix converted to how many tons?
Something on the order of .6 yards per US ton
That depends on the material, as a ton is a unit of mass, while cubic yards are a measure of volume.
A ton of gravel can, at best, be described in cubic yards. A cubic foot of gravel weighs about 100 pounds, so a full ton will be about 20 cubic feet, or .74 cubic yards.
Depends on the density of the ballast.
A cubic foot of dirt is about 100 pounds. To fill a ton, 20 would be needed, but to fill a cubic yard, 27 would be needed. As such, a ton of dirt would only fill about .74 cubic yards.
A yard is a measure of length and a ton is a measure of mass. If you mean cubic yards then it depends on what the ton is example a ton of dirt or sand or even gravel.
There would be about 3.704 cubic yards of dirt per every ton. This number has been rounded up from nine decimal places to six.
most soils will weight 600-800 Kg per cubic meter
A cubic yard of topsoil, if compacted to get the air pockets out will weigh more than 1 tone. If the topsoil is loose, a cubic yard of it could weigh about 1 ton. A lot depends on the topsoil, and whether it has more stone dust or less in it. The more moist the topsoil is, the more likely it will weigh more than a ton.
The rule of thumb for wood chips is that they weighs 550 pounds per cubic yard. So a ton of wood chips would equal about four cubic yards.
A ton is a unit of weight--- 2000 pounds. A square yard is a unit of area. Perhaps you meant cubic yards, which is a unit of volume and more related to weight. For example it would make sense to ask how many cubic yards of concrete are in a ton. But , unfortunately, your question, as stated. is incomprehensible.