0
Bones Swiss creamics
Wiki User
∙ 12y ago
Add your answer:
Earn +20 pts
What are the symptoms of - or - how do you diagnose a bad front wheel bearing on a Taurus - Sable?
If you hear a noise you suspect is a bad wheel bearing try this. While driving slowly turn the wheel sharply to the left. If the noise goes away your left front wheel bearing is bad. Now, turn sharply to the right. If the noise goes away you right front wheel bearing is bad. The only 100% sure fire way to know for sure is to remove the wheel bearing and inspect it.
Can big offset wheels cause wheel bearing failure?
The perfect wheel has zero offset. That is, the surface of the wheel bolted to the hub is equidistant from both the interior and exterior edges of the wheel. The greater the offset from " zero", the less "linear the load is on the wheel bearing. Instead of pressing down at 90 degrees to the bearing, the weight is now preloaded to the side of the bearing center line. This causes un-natural wear on the bearing, which can cut down the bearing life by a significant amount. Big Torquer
96 Dodge Dakota Overtightened the wheel bearing nut Now growling worse than before Now cannot get the outer wheel bearing out Came out easy before What now?
either take it to a mechanic who knows what the hell they are doing, or drive your truck into a lake
What is a skateboarding wheel made out of?
urethane back in the day, most likely now the same urethane ***yes, it is still urethane
How do you change Jeep liberty rear wheel bearing?
First apply brakes. Next remove real wheel and wheel bearing cap. Now remove hub, turn center nut clockwise. Bearings should pull with ease.
How do you replace rear wheel bearing and seal on 3.2 tl?
First, the car will need to be raised. Then the rear wheel should be removed. Now the existing bearing and seal can be removed and the new ones fitted.
What does a bad hub bearing sound like?
Sort of like a rub or grind coming from wheel. If you suspect a bad bearing you should have it checked like NOW!!! If it fails your wheel is gonna come off.
How do you replace rear wheel bearing and seal on 3.2 acura TL?
First, the car will need to be raised. Then the rear wheel should be removed. Now the existing bearing and seal can be removed and the new ones fitted.
Does Justin Bieber need a wheelchair?
Well Justin Bieber was in a wheel chair when he broke his leg while skateboarding. But now Justin is fine and dandy!
What is the torque value for a 1997 Dodge Dakota front wheel bearing?
Torgue the bearing to 30-40 ft lbs,to seat the bearing, then back it out. Now tighten it by hand just enough to hold the bearing in place. Spin the wheel by hand as you snug it back up. You don't want to over-tighten it, this would cause friction, making it harder for the wheel to spin. Not too loose either though. Just enough so there's no "play" when you try to wiggle the wheel. Now you're ready to put the cotter pin back. Somebody had posted an answer with an extremely high torgue spec. If you already took that advice, you probably ruined you're bearing by now.
When replacing wheel bearings do you have to replace the rotor?
Rotor not usually necessary, but new hub is generally part of bearing now.
When was skateboarding most popular?
right now
