How to Change a Circular Saw Blade

Doing your own home repair work can sometimes seem like a challenging task to say the least. There are many tools needed in the process: one of which is a circular saw. There are times when replacing the blade in a saw becomes a must. One reason can be that it simply needs an upgrade. Another would be that the original blade is old and has become dull. In any case, changing the blade in a circular saw requires careful preparation as it can be very dangerous if not done properly. This article is designed to explain in detail how to change a circular saw blade.

STEP 1

Make sure that all of the power is turned cut off from the saw. Unplug it from the wall and make sure the cord is no where near an outlet. After all, you don’t want it to turn on while you’ve got your hands on the blade.

STEP 2

Slide the guard away from the blade, exposing it. Then sit the entire saw down on a work bench and make sure it is kept immobile.

STEP 3

Using two clamps, secure the saw to the bench making absolutely sure that it is secure. Even though the saw is unplugged, it can still fall and severely cut your foot.

STEP 4

There is a hole on the saw blade that will allow access for a drill bit. Locate this hole and have a bit handy.

STEP 5

Place the drill bit through the hole to make sure that the blade doesn’t move. This is to keep it from cutting your hand. Please note that many newer models come packed with blade lock features that will keep the blade immobile.

STEP 6

Use a socket or wrench to remove the blade bolt that is located in the center of the blade. After this bolt is removed, the entire blade will release from the saw. Remove it.

STEP 7

Install the new saw blade and make sure that the bolt is secured tightly. Now remove the blade lock and push the cover back over the bladed part of the circular saw. Now your circular saw is as good as new.

Ah-OO-nah

Your birthplace

For any service provider BSNL/Vodafone/Airtel/Idea/Tata...

If you are getting issue with PC and net is working fine on your mobile then solution is very easy as below:

I have tested for Android, don't know about other samsung phones(simple ones). Also the data connection should be active in your phone then only this solution works (means you should be able to use internet in your mobile)

1) Connect the mobile to PC with USB

2) Goto Mobile Settings

3) Goto Wireless and Networks

4) Goto Tethering and portable hotspot

5) Select USB Tethering

6) Done If Internet was working on your mobile and is working then on your PC same will start working w/o any Dial Up or anything..

Any more question on it welcome :)

That really all depends on where you are located in rural Alberta. You can sign on an agreement with Telus, or find some local company that does internet service for local rural areas to set up something for you. A lot of times these companies operate by word-of-mouth, so if you have neighbors that are getting internet, you can talk with them and see what service provider they're going through to get internet to their homes.