To remove the fan clutch in an 04 Ram 1500, hold the fan in place using a special fan removal tool. Turn the nut to remove the fan. The tool should be able to be rented through a local auto parts.
With a fan clutch removal tool from an auto parts store.
It requires a 36mm wrench and a spanner/holding device. The fan clutch unscrews counter clockwise.
The fan clutch nut on a Dodge Ram 1500 with a 5.2-liter engine typically requires a 36mm socket for removal. However, it's advisable to double-check your specific model year, as variations may exist. Always ensure you have the proper tools and follow safety precautions when working on your vehicle.
It requires a 36mm wrench and a spanner/holding device. The fan clutch unscrews counter clockwise.
how do you check the fan clutch not working on 2003 ram 3500 5.9
Not since about 1985
It is not adjustable.
Yes it takes a 36mm wrench and a holder for the pulley to remove the fan clutch,
Check clutch fan
Yes, it is an electrically controled mechanical fan.
Raise the front end of the 2001 ram 1500. Remove the drive shaft and transmission. Unbolt the clutch, and check the pressure plate for wear. Using an alignment tool, install the new clutch. Reverse the procedures to finish the installation.
Disconnect the battery. Using a clutch fan tool, hold the clutch to loosen and remove it. Remove the fan shroud. Drain the radiator. Remove the water pump belt, then the pump. Install the pump and reverse the process to finish the process.