0
hondahookup has manual you can download
Wiki User
∙ 18y ago
Add your answer:
Earn +20 pts
What is the correct 1991 Crx head torque specification and sequence?
hondahookup.com has manuals u can download with the info u need
Cylinder head torque sequence for a 1991 pathfinder?
what is the head torque sequence for a 1991 pathfinder
What is the torque sequence for rocker arm bolts on a 1991 ford 1.9 engine?
There is no torque sequence just torque rocker arm studs to the proper torque
What is the torque specification for Toyota Camry 1989 four cylinder head bolts?
1991 toyota camry head bolts torque specs
What is the proper spindle nut torque for a 1991 Honda accord?
134 ft-lbs
What is the torque sequence for the head on a 1991 Plymouth Voyager with a 2.5L V4?
I believe its 40 ft lbs
What are Torque specs for main and rod caps on 3.1L v6 1991 Buick Regal?
The 1991 Buick 3.1 liter rod cap torque specification is 90 pounds. The rod bolts should be torqued in 45 pound intervals.
Torque specs on a head bolts for a 1991 yz 125?
The cylinder head bolt torque specification is 90 pounds. The cylinder head bolts should be torqued in 30 pound intervals.
What are the cylinder head torque specs and torque sequence on a 1991 Honda Accord?
Honda Accord 1977-1993 1.8Ltr Engine code F18A2 2.0Ltr Engine codes F20A2 F20A2/3/6 F20A4 F20A5F20A8 2.2Ltr Engine code F22A3 All torque figures are listed as stage 1. 40 newton metres stage 2. 70 newton metres stage 3. 108 newton metres Tightening sequence is 8 5 2 4 10 9 3 1 5 7 Bolts 8 & 9 are nearest to the flywheel side of the engine hope this helps
How much horsepower does a stock 1991 Honda Accord EX have?
The EX with the VTEC engine has 130 H.P. and 144 Lb Ft of torque.
What are the torque specs and pattern on the head bolts of a 1991 Toyota pickup with the 3.0?
The torque specs and pattern on the head bolts of a 1991 Toyota pickup with a 3.0 engine are 5, 4, 6, 3, 2, 7, 1, and 8. This sequence is started from the center of the head and requires 75 foot pounds of torque on each bolt.
What is the torque sequence on the crank for a 91 Sonoma GMC with a 2.8?
The 1991 GMC Sonoma 2.8 liter crank sequence should begin at the front of the crank alternating to the rear. Keep alternating back and forth until you reached the center.
