There is a snap ring around the regulator & you need snap ring pliers to remove it. A rubber "O" ring is used to seal the regulator on the inside of rail & it is a tight fit.
The pressure regulator is part of the pump module in the tank.
The regulator is part of the pump module in the fuel tank on a 1999 Dodge Dakota.
The fuel pressure regulator is part of the fuel pump module in the fuel tank.
i have a 1999 Dakota 3.9 and fuel regulator is on top of the fuel pump on the fuel tank... i have a 1999 Dakota 3.9 and fuel regulator is on top of the fuel pump on the fuel tank...
The regulator is only available with the fuel pump. So if the pressure is not correct, you need to replace the pump.
it is built into the fuel pump module, and caontrols the fuel pressure to the engine
100-125psi
It is mounted on the driver's side fuel rail, at the back of the motor.
Mounted on top and inside the fuel tank.
The voltage regulator is not in the alternator. The engine computer is the voltage regulator on a 1996 Dodge Dakota.
Passenger side of the block. Near the trans bell housing.
It is under the housing that the lower radiator hose hooks to on the engine on the 4.7L V8.