As VA stands for Volt Amps to answer the question a voltage must be given. W (Watt) = V (volts) X A (ampere) or kva = kw. 1000 kva has amps depends on volts. * 110 volts (Home Electricity voltage) - 9090 amps * 240 volts (home electricity voltage) - 4166 amps * 440 volts - 2272 amps
This question is asking about energy or power. For a 100% resistive load, having a power factor of 1, an amount of one kVA is exactly the same as a one kilowatt which is 1000 watts.
For a resistive load, the number of amps of current needed for a particular amount of power or energy will always depend on the voltage of the equipment.
For example, if some equipment runs at 120 volts then, to use 1 kVA (one kilovoltamp) would need a current of (1000/120) = 8.333 amps.
If it runs at 1000 volts then, to use 1 kVA (one kilovoltamp) would need a current of (1000/1000) = 1 amp.
To answer this question the voltage will have to be known. I = W/E.
Amps are not put on a transformer they are drawn from the transformer. A voltage is needed to answer this question.
There is insufficient information in the question to answer it. You need to also supply the voltage in order to answer the question. Please restate the question.
To answer this question the voltage has to be known. The v in kva stands for volts. I = W (VA)/E. Amps = Watts/Volts
75 Amps theoretically Need to know if the generator is 3 phase or single phase.
Typically 75 amps on natural gas, 85 amps using propane. Peak amps(for less than a second) to start a big appliance, like an A/C condenser, are 130.
The equation that you are looking for is I = W/E. Amps = Watts/Volts. The generator has the capacity to supply 25 amps. Of course the load is what governs the amount of amperage drawn. Any load greater than 25 amps will load the generator down and probably trip the generator's breaker.
To answer this question the motor's voltage must be stated and whether the supply voltage is single phase or three phase.
An 8000 watt generator at regular house current 110v will supply 72 amps.
62.5 amps
75 Amps theoretically Need to know if the generator is 3 phase or single phase.
Typically 75 amps on natural gas, 85 amps using propane. Peak amps(for less than a second) to start a big appliance, like an A/C condenser, are 130.
The equation that you are looking for is I = W/E. Amps = Watts/Volts. The generator has the capacity to supply 25 amps. Of course the load is what governs the amount of amperage drawn. Any load greater than 25 amps will load the generator down and probably trip the generator's breaker.
The size of the generator is based on the size of the load you want to supply. Size up the load in watts or amps along with what phase (single or three) and voltage that the load requires. These are needed to give a complete answer.
The formula you are looking for is , A = kva x 1000/Volts.
To answer this question the motor's voltage must be stated and whether the supply voltage is single phase or three phase.
An 8000 watt generator at regular house current 110v will supply 72 amps.
The answer is that it depends upon the a. efficiency (to determine its input power). b. supply voltage. c. nature of the supply (single-phase, three-phase, d.c., etc.)
Single-phase, 2.5 amps; three-phase 1.443 amps.
This depends on what voltage the range is rated for and if it is single phase or three phase. At 220 volts single phase it is about 60 amps, 240 v single phase , 53 amps and at 480 v three phase about 15 amps.
To answer this question the voltage of the generator must be given.