the gap is .035 thou for a 1999 650 vstar the gap is .035 thou for a 1999 650 vstar
18 mm spark plug socket
8mm-or about .32 thousants
you take the spark plug wire off and get you a 13/16 wrench and the plug will be right underneath the gas tank,you can get to it better on the left side of the bike.The side were the clutch lever is.Just unscrew and put the new one in.
what is the spark plug gap size for a 1987 suzuki savage 650?
The 2006, Kawasaki Brute Force 650 spark plug gap is .014. Most spark plugs come pre-gapped from the spark plug manufacturer.
I have had my v-star for 3 years it is a 650 as well it has 2 spark plugs each one is on the top of the jug simply pull the plug wire off and remove with a spark plug wrench. They are at an odd angle but they can be taken out and replaced take special care not to get the plugs cross threaded should go in by hand at first do not over tighten
The spark plug gap size for a 1986 Suzuki Savage 650 should be set at .4 mm. A new spark plug may be purchased at any auto parts retailer.
.030
lhlike 30
On a Kawasaki Prairie 650, the spark plug is located on the engine's cylinder head. To access it, you'll need to remove the plastic engine cover, which is typically held in place by a few bolts. Once the cover is off, you should see the spark plug at the top of the engine, near the front. Use a spark plug socket to remove and inspect or replace it as needed.
Spark plug gap Honda CB 650- spark plug gap - 0.024-0.028 in. (0.6-0.7 mm) Honda Shadow VT750 - spark plug gap - 0.8-0.9 mm (0.031-0.035 in.) These are both hondas - please be more specific on type of Honda you want it for.
yes ive got one it works a treat I got it from Walmart