Loosen bolt on arm to release tension, remove wires from back, remove arm bolt & bolt at 6 o clock, reverse to install. Use pry bar to tighten belt before tightening arm bolt.
chit!!
No
it can only be accessed for change beneath car. under front bumper passenger side.
i also own a 96 passat GLX VR6 and it is alot of work to change the alternator in a vr6 you pretty much have to take the front of the car off you need to remove the headlights to get to the raidator then you have to remove the radator to get to the alternator from there its a pretty simple process you need to remove the belt from the alternator then remove the bolts that hold it on and put the new one on and use a screwdriver to replace the belt onto your new alternator then you have to put the whole front of the car back on hope that helps
loosen the pulley, side the belt off, slide the new one on, tighten the pulley
on steering neck?
no
in the alternator
loosen the bolt on the bottom of the alternator.
The regulator is part of the engine computer on a 1996 Jeep. It is not in the alternator.
belt
I use LRP type gasoline to my '96 suzuki dr 200se