0
What else can I help you with?
When a powerboat is operating at night from which directions must the white masthead light be visible?
When a powerboat is operating at night, the white masthead light must be visible from both the front (fore) and the sides of the vessel. It should be mounted at least 1 meter above the sidelights and visible from an angle of 225 degrees. This ensures that other vessels can see the powerboat's position and direction of travel, enhancing safety on the water.
How many lights are required on a 50 Meter barge anchored in a Special Anchorage Area designated by the Secretary?
A 50-meter barge anchored in a Special Anchorage Area typically requires at least one all-round white light to be visible in all directions. Additionally, if the barge is not otherwise lit, it may need to display additional lights to ensure visibility and safety, depending on local regulations. It is essential to consult the relevant navigation rules or local maritime authorities for specific requirements.
Describe how a meter would be connected in a circuit too measure the voltage at a light bulb?
When connecting a volt meter to a light bulb to measure the voltage of the light bulb, run a third wire from where the wire enters the bulb to one terminal of the voltmeter and a fourth wire from the other side of the bulb to the other terminal of the voltmeter.
Who invented the first light meter?
The first handheld light meter was invented by Arthur James Dalladay in 1932. He created a light meter that photographers could use to measure the intensity of light for more accurate exposure settings.
What information is shown on the display meter of the Cardio Orbitrek DF005?
The display meter on the Cardio Orbitrek DF005 shows a persons time, speed, distance, and pulse. The products display is also capable of showing the amount of calories burned as the individual is using it.
Waves in a lake are 2 meter in length and pass an anchored boad 0.5 second apart What is the speed of the waves?
4Meter per second.
How to use a light meter with a film camera?
To use a light meter with a film camera, follow these steps: Set the ISO/ASA on the light meter to match the film speed of your camera. Point the light meter towards the subject you want to photograph. Press the button on the light meter to measure the light. Adjust the aperture and shutter speed on your camera based on the light meter reading. Take the photo using the settings recommended by the light meter. Remember to adjust the settings as needed for different lighting conditions.
What is a light meter used for?
If you mean a light meter that is used in a photographic studio, then it measures the light that hits the 'subject' from the studio lighting, the light meter then tells you what you need to set your camera to, for the correct exposure.
Instrument used by umpire in cricket to measure light intensity?
lux meter or light meter
What is frequency indicator?
A: It is a device or meter that read frequency as an input and display its value
What does a taxi cab have that a regular car doesn't?
A meter - to display the cost of the journey !
Calculate the number of light years in one meter?
100 quintillionths of a light year are in a meter http://en.wikipedia.org/wiki/Light-year
