A circuit in which electricity only flows in one path is called a series circuit.
A closed circuit in which the current divides into two or more paths before recombining to complete the circuit. The voltage remains the same throughout the circuit.
Current will tend to take the path of least resistance in any case. That's its nature. A short circuit (or "short") is a low resistance current path that current will follow if it appears.
Simple parts of a circuit are switches, light bulb, battery and connecting wires.
All the branch circuits in your house are parallel. They have a constant voltage applied to any device plugged into an outlet. If you thought about an analogy for a parallel circuit, imagine that the rails on each side of rungs represented the hot and neutral wires of a typical household branch circuit. The rungs would be the loads connected in parallel. Each "load" draws the current needed to operate the specific device. The sum of all the currents for the "loads" is equal to the total current being supplied through the circuit.
Ohm's law states that "The current is directly proportional to the applied EMF (voltage) and inversely proportional to the resistance in the circuit." <<>> if resistor exists, resistance decreases according to ohm's law, current is directly proportional to voltage and current is inversely proportional to resistance it means as current increases, voltage increases. resistance increases, current decreases so as voltage if there is no resistor, there should be no resistance except internal resistance of voltmeter and ammeter
A parallel circuit has more than one current branch. In a parallel circuit, the components are connected in separate paths to the voltage source, allowing for multiple current paths and different current levels through each branch.
yes
A circuit that has more than one path for the current to flow is a parallel circuit. The circuit must have two or more paths to be considered parallel. A circuit that has only one current path through multiple components is a series circuit.
Because there is only a single path in series circuit and many paths in parallel circuit.
In a parallel circuit, each component is connected directly to the power source, resulting in multiple electrical paths. The number of electrical paths in a parallel circuit is equal to the number of components connected in parallel.
That really depends on how the circuit is designed.
A parallel circuit has different paths for current to flow. In a parallel circuit, the components are connected side by side, allowing current to flow through multiple paths simultaneously. This results in different currents flowing through each path based on the resistance of the components.
In a parallel circuit, there are multiple paths for current to flow. Each branch of the circuit provides a separate path for current to travel from the source to the load. This allows for different components in the circuit to operate independently of each other.
one
In a series circuit, current has to pass through each part of the circuit. In a parallel circuit, the current has several alternative paths.
That really depends on how the circuit is designed.
A closed circuit in which the current divides into two or more paths before recombining to complete the circuit.