A flashing yellow x indicates this lane will be used for what?

A flashing yellow signal means?

means nothing Wrong! It means caution. Something requires extra attention. At an intersection, a flashing circular yellow means to take extra caution, and watch for traffic on the cross road (which has a flashing red light). A flashing red light is the same as a stop sign. A flashing yellow arrow means you ma turn in the direction of the arrow, but you must yield to conflicting traffic. If the flashing yellow light is not at an intersection, it either calls attention to a road hazard on an accompanying sign, or indicates that a special regulation indicated on the sign is in effect (School speed limit 20 when flashing).

When driving down the road the lane on your left is marked on each side by a solid and broken yellow line what is the lane used for?

for passing other cars

When are flashing red and yellow lights used to control some traffic intersections?

Flashing traffic lights are used when the control system is not functioning properly, or when there is very low level traffic (to the point that lights become unnecessary).

Is it legal to cross a solid white line from a straight through lane into a left turn lane?

noI have to say yes. The yellow line is the no no. Please get this one correct before I go to jail. In New Jersey it is illegal to cross any solid yellow or white line on a public roadway with a motorized vehicle except specifically as an emergency maneuver or as directed by a law enforcement officer or to enter or leave the roadway. As such, in NJ it is illegal. In another state, maybe not.It is not legal, crossing any solid line can result is a ticket, including the yellow lines with the diagonal slashes that are before the turning laneAdditional answerAll US State driving rules say that you may NOT cross a single solid line (white or yellow) if it is on the drivers side. It is ok to cross single solid line if it is on the right of you and on a multi lane highway Alos you can cross a single solid white line ifTurning left at an intersection.Turning into or out of a private road or driveway.In a carpool lane that has a designated entrance on the left.Instructed to drive on the other side of the road because your side is closed or blocked.Additional answer 2I disagree. Manual on Uniform Traffic Control Devices published by the U.S.D.O.T. Federal Highway Administration is the authority on this issue. It states (and I am pasting verbatim and as this is a public government manual, it is not subject to copyright.)A single SOLID white lane line indicates that crossing the line to change lanes is discouraged, for example when a separate turn lane is provided.A DOUBLE SOLID white lane line indicates that it is prohibited to cross the line to change lanes. This type of line is used, for example, to prohibit lane changes in multi-lane one-way tunnels or on the approach to an obstruction in the roadway between two lanes in the same direction.A BROKEN (dashed) white lane line indicates that it is permissible to cross the line to change lanes.A BROKEN (dashed) yellow centerline on the left side of a travel lane indicates passing is allowed in that direction.A SOLID yellow centerline on the left side of a travel lane indicates passing is prohibited in that direction.

What does a center turn lane look like?

The center lane is a lane that is commonly seen in cities. I have seen it outside of cities too. This lane is used by both directions of travel for that highway. When you enter this lane you should have 2 solid yellow lines with a dotted yellow line facing the inside of the lane on both sides of your car. There is also 2 left turn painted white arrows opposing each other. The center lane is not a travel lane, thus is cannot be used to pass another vehicle. This lane is also not a divide for the highway, the highway is still undivided.

Is it legal to drive in a lane with diagonal yellow lines?

Diagonal stripes are generally used to indicate "lane closed" it isn't meant to be one, and you shouldn't drive here." So, basically, no.

What must you do when you encounter a flashing red while driving?

A flashing red traffic light is used the same way as a stop sign. You treat a flashing red traffic light the same way you do as a stop sign. If the traffic light is "blacked-out", it's to be treated as an all-way stop. What I do when I come up to a flashing red traffic light, I look at the cross-traffic signals to see if they're also flashing red, or if they're flashing yellow to see if they stop or if they don't stop.

What indicates the center of a two-way road used for two-way traffic?

Yellow lines mark the center of a road used for two-way traffic.

What does it mean When you see a yellow X lane signal?

prepare to leave the lane safely Explanation: Lane signals are used: -When the direction of the flow of traffic changes during the day. -To show that a toll booth is open or closed. -To show which lanes are opened or closed. You must never drive in a lane under a red X. A yellow X means that your lane signal is going to change to red. Prepare to leave the lane safely. You may drive in lanes beneath the green arrow, but you must also obey all other signs and signals.

What is an apron flashing?

An apron flashing is a term used for a flashing located at the juncture of the top of a sloped roof and a vertical wall.

What element is used bright flashing and advertising sign?

Neon is used for bright flashing signs such as advertising signs.

A flashing yellow x indicates this lane will be used for what?

Add your answer:

A flashing yellow signal means?

Flashing yellow lights are used for?