if resistors connected in series the resistance will increase.Then it limit the flow of current through it. voltage may be increased.
A: by connecting any resistors in series it will limit the current flow it will effect the current but never the voltage applied
If the voltage across a resistor or resistors is halved, then the resulting current will also fall by half.
resistors is a most common electronic component and is used to control the voltage and current in a electronic circuit. resistors is inversely proportional to amount of power supplied,given by (power= voltage *current).
A: A RESISTOR is a passive component it cannot control voltage these components and/or current it can however limit
Resistors have no polarity. The voltage across a resistor is determined by the direction of current flowing through that resistor (and vice versa).
A: The relationship is that the current will divide for each paths in a parallel circuit and the voltage drop across each will be the source voltage. In a series circuit the current will remain the same for each component but the voltage will divide to reflect each different component value. And the sum of all of the voltage drops will add to the voltage source.
Which is true of a series circuit that has two resistors?A.The resistors are on different branches of the circuit.B.Neither resistor has current flowing through it.C.One resistor has no voltage across it.D.Both resistors have current flowing through them.
The three basic elements of electricity are: Voltage Current Resistance
Please specify whether the resistors are connected in series or in parallel.
Nothing. But the current is halved.
When resistors are connected in series in a circuit . the voltage drop across each resistor will be equal to its resistance, as V=IR, V is direct proportional to R. An A: The relationship is that the current will divide for each paths in a parallel circuit and the voltage drop across each will be the source voltage. In a series circuit the current will remain the same for each component but the voltage will divide to reflect each different component value. And the sum of all of the voltage drops will add to the voltage source
It depends upon the connection of the resistors, if the resistors are connected in parallel then the voltage is same where as in case of resistors connected in series the voltage is different across different resistors.
A: The relationship is that the current will divide for each paths in a parallel circuit and the voltage drop across each will be the source voltage. In a series circuit the current will remain the same for each component but the voltage will divide to reflect each different component value. And the sum of all of the voltage drops will add to the voltage source.