not so fast...prior to changing to vortec, Chevy had a standard distributor with a cap that had the plug wire hook-ups pointing straight up. With the newer vortec engine, the plug wires come out the sides of the cap. The real difference is that the newer distributors require a crank sensor and have a different wiring plug.
Are the door interchangeable on an 1987 chevy truck and an chevy blazer 1988
The distributor and the oil filter.
Yes! Nearly all chevy parts are interchangeable. And even pontiac parts with the same motor are interchangeable. But yes. The steering column is interchangeable
yes they are
Almost no parts are interchangeable.
yes Generally, the 1986 and older are interchangeable and the 1987 and up are interchangeable, but not with each other.
No. They are not interchangeable.
Most parts are interchangeable
To fit properly, no.
You have to replace the intake manifold gaskets, which is not an easy job but if your mechanically inclined it shouldn't be a problem .disconnect the battery and i can not stress this enough, mark the distributors position to the engine block if not your computer will set a cam to crankshaft correlation trouble code.
No it isn't.
a 2.8 isuzu/chevy v6
No, they are not interchangeable.
1994 and up.
If you have the 4.3 L engine, no.
hei stands for high energy ignition and refers to the distributor. previous distributors used points and later distributors were controlled by the on-board computer.
Ford and Chevy will not interchange, SORRY
Yes it will. It will bolt right on... 100% interchangeable.