No, I have a 3.55 in mine, I think there is one lower than that, and then a 3.73, and then a 4.10. What the hell is a 27? ---------------------------------------------------------------------- " OILMAN " had submitted a list of axle codes for the 1997 - 2004 F150 / F250 and the list shows axle code 27 as being a 3.31 conventional differential
I am not positive about this but, I believe that this indicates that the axle has a 3.00:1 gear ratio. Check with you local Ford dealer for a definitive answer.
Open the drivers door and look for an information sticker on the end of the door It will have the axle code for your truck
Open your drivers door and look at the information stickers , look for the axle code If you resubmit your question with the year of your F-150 and the axle code I'll try to look up the gear ratio - Helpfull
I'm not sure if this is the same on a 2007 , but axle code 26 for 1997 to 2004 F150 trucks is a 3.73 conventional axle
I believe axle code " 18 " is a 3.08 conventional axle ( non limited slip )
Open the drivers door and look for an information sticker , it should show the axle code ( 2 numbers or 1 letter and 1 number for the limited slip axle ) The code indicates whether you have a conventional axle or a limited slip axle and what the gear ratio is Submit another question with the axle code and I'll try to find it - Helpfull
Axle code 12 indicates a 2.73 conventional non positraction differential. Many people that tow a lot go with a 3.55 and those are axle codes 19, 29, 39, 49, and 69.
The Axel code is on the drivers side door [On the post] it is stated on the sticker either a H9 which is a 3:55 ratio or an I9
I believe you can find the axle code on one of the stickers on the end of the drivers door - then the code is used to find out what differential gearing your F150 has
For a 2001 F150, you can check the axle codes on your door sticker. The axle code to rear axle ratio values are as follows: 17 for 3.31 open differential, 19 for 3.55 open differential, H6 for 3.73 limited slip, H7 for 3.31 limited slip, and H9 for 3.55 limited slip.
Mine is 3:55
I believe that is a 3.55 conventional axle ( non - limited slip )