If a calculation of volume in cubic inches is needed, all dimensions need to be converted to inches before calculating the volume. For example, if calculating a rectangular prism in cubic inches, the dimensions need to be converted to inches, then the volume is calculated as length times width times height.
First calculate the cubic inches, then convert to gallons. Volume=pir2h=3.1416x32X120=3393 cubic inches 3393 cubic inchesx0.00433 gallons/cubic inch=14.7 gallons
You cannot convert cubic inches to inches. Cubic inches are units of volume and inches are units of length.
The ratio of 125 cubic inches to 125 cubic inches is 1.
Volume = Height x Length x Width 91 inches x 112 inches x 60 inches = 611,520 cubic inches. This large a volume is usually converted to cubic feet or cubic yards. 611520 cubic inches = 611520/1728 cubic feet = 353.89 cubic feet 611520 cubic inches = 611520/46656 cubic yards = 13.1 cubic yards
To calculate the capacity of a pipe you need to first calculate the area and volume. So assuming your pipe has an inside dimension (ID) of 3 inches, you would use the following equation. πR2 = area πR2xH = volume π=3.1416 Using inches as our unit R (radius) = half the diameter = 1.5 inches H (height or length of pipe) = one foot of pipe = 12 inches Gives you the volume in cubic inches 1728 cubic inches per cubic foot (12x12x12) One cubic foot = 7.48 US gallons (RxR)x3.1416x12 (1.5x1.5)x3.1416x12 = 84.82 cubic inches 84.82/1728=.049 cubic feet .049 cubic feet x 7.48 US gallons per cubic foot = 0.36652 US gallons per foot of 3" ID pipe.
One cubic inch is about 0.00001638706 cubic meters.Cubic inches x 0.00001638706 = cubic meters
There are 61.02 cubic inches per liter. So, cubic inches divided by 61.02 = liters.
Divide the number of cubic inches by (12 X 12 X 12), ie 1728.
983.2 cubic cm
If you remember the following facts, you'll never go wrong: ==> 1 cubic foot = 1,728 cubic inches ==> 231 cubic inches = 1 gallon
Standard cubic feet per minute in regards to water can be converted to inches. What you will do is first calculate the cubic feet. Next, convert the cubic feet into cubic inches by using the standard measurement of 1 cubic foot being 1,728 cubic inches.
12 what? 12 inches cubed = 1,728 cubic inches 12 feet cubed = 2,985,984 cubic inches 12 yards cubed = 80,621,568 cubic inches
The total cubic feet the refigirator takes up is all you can calculate from this information. 25''x28''x66''=46200 cubic inches 1728 cubic inches = one cubic foot. 46200/1728=26.73 cubic feet
V = ~113.097 cubic inches.
To calculate volume use this formula - length X width X depth. To go from inches to cubic yards use this formula - length in inches X width in inches X depth in inches = cubic inches. Then divide the cubic inches by 1728 to get cubic feet. Finally divide cubic feet by 27 to get cubic yards. Your Example - 108 inches X 60 inches X 6 inches = 38880 cubic inches 38880 cu in/1728 = 22.5 cubic feet 22.5 cu ft/27 = 0.834 cubic yards
That is impossible to calculate without at least one other figure.
Since there are 12 inches in a foot, you have to cube 12 and multiply it by your cubic ft. In other words, 136.5 x (12 x 12 x 12) = 235,872 cubic inches.