Footing Size 3'9" x 3'9" C/C 6"
u.s. steel
Not knowing what size garbage can do the following. Calculate volume of penny. Calculate volume of garbage can. Divide A into B
Density is how much mass is compressed into a state of volume. Considering bread is made of water, carbon, and other light molecules, it doesn't have much mass. Steel has much more mass and thus will be more dense; however, if u can compress the bread until it has the same mass at the same volume of the steel, it will have the same density.
yes it could,it depends on the size and mass of the ball
Wire gauge is used to determine the size wire needed to carry the correct amount of current for the job. It must be sized appropriately for the current in the circuit you are building.
with tool
Ignore the zinc content. Just calculate the volume of steel in the given type (e.g schedule 40), size and length of pipe and multiply by the density of that grade of steel.
calculate in meters wood that will be needed for roof of a building with size 14.125m x 3.630.
The cost of a building is calculated by the number of corners that are inside the building. You can also calculate the cost by using the square-foot size.
You will need a footing to support a moment of 21,000 ft.lbs.Moment = Arm x ForceMoment = 1000 lbs. x 14 ft. = 21,000 ft.lbs.
a10kp axial loads is applied to a short wooden post which is supported by a concrete footing resting on undistributed.determine a)the maximum beering stress on the concrete footing. b)the size of footing for which the avareg bearing stress on the soil is 20kpsi
This depends on many factors including the size nd height of the building, type of construction, types of metals utilized (copper, steel, aluminum, stainless, etc.)
I am looking into building an office space that it 13x12x15. How much would it cost to have a room that size built?
Forged steel is metallurgically worked, ususlly hot, to a smaller size than the cast/ingot size. Cast steel is the product of pouring molten steel into a mold, usually to the final usuable size.
for steel structure building can i use: -size 2.5mm of 7016 welding rod as a filler for welding IPE240 to plates -size 2.5mm of 7016 welding rod as 2nd pass
depends on what you are forging (Shape / size) and the forging process (Extrusion / upset / mould / part press / finish press etc).
A footer, or footing, is a concrete base of an engineered size depending on the load, that the carpentry is attached to and supportedby.