Yes it will, to a maximum of 2Gb. This board also supports SD Ram, but the 2 DDR and SDRam, cannot co-exist on the same board at the same time.
Hope this helps
be safe
Cadishead Computers
It supports ddr (first generation - ddr1).
DDR or SDRAM
No you cannot the ECS P4VXASD2 supports the following:Two 184-pin 2.5V DDR SDRAM (DDR266/DDR200) Maximum: 2GB DDR or SDRAM (Buffered) / 1GB DDR or SDRAM (Unbuffered)
Im afraid this is not possible. This motherboard takes DDR and / or SD ram, not DDR2.Both SD and DDR can not be used at the same time. IMHO DDR would be the better choice.Max allowed would be 2Gb (ddr 266 or ddr 200 buffered)Max allowed is 1Gb, unbuffered.Hope this helpsBe safe
yes. but it will only run at 4x. not 8x. oh yea. get an ATI Radeon. don't wast money on that geforce garbage.
In order to upgrade SDRAM with DDR, you will need to replace your motherboard. DDR uses a different slot than SDRAM, so if your motherboard is using SDRAM currently, you will most likely have to replace your motherboard in order to make your system support DDR.
Yes, DDR 400 memory will work in that motherboard, however only at a maximum speed of 333MHz. The memory will be underclocked to the maximum speed the motherboard can handle. Be sure not to try to put in DDR2 memory, as they are physically different and will not fit.
Hi, I believe the GeForce FX5200 is a 128MB DDR video card and its compatible with an AGP 8x interface. Since I have the same motherboard, P4VXASD2, I know for a fact that this motherboard does not support the AGP 8x interface, and on the contrary, the FX5200 is a AGP 8x card and I am pretty sure it is not backwards compatible with AGP 4x which in fact is supported by your motherboard. If you are looking for a video card in the same/lower price range, I would recommend you to buy the ATI Radeon 9200/9200SE/9250 because they support upto a max. of 8x and they are also backwards compatible with the AGP 4x. I hope that answers your question.
The Intel 915 GAV motherboard supports DDR SDRAM with a maximum capacity of 4GB. Supported RAM Speed: PC2700, PC3200 (DDR - 400 and 333 MHz) http://support.intel.com/support/motherboards/desktop/d915gav/sb/CS-012066.htm
No. PC3200 is DDR (1) 400, PC2 3200 is DDR2 400. They are incompatible.
I have this motherboard with 1GB RAM but it is DDR. If a Motherboard supports DDR it cant support DDR2.
Unfortunately not. DDR has a different amount of pins compared to a stick of DDR II. Also the slot position is slightly different. Hope this helps Be Safe Cadishead Computers