Topaz has a hardness of 8 on the mohs scale.
A steel file has a hardness of 6.5, or maybe 7+ if it has been hardened.
In theory, the topaz is likely to be harder than the average steel file.
=== === ...you may want to avoid putting this to the test, because, although you might scratch the steel file with the topaz, you might also just damage your topaz in the process, because, who knows, maybe your steel file is made of best high-carbon steel, which has a hardness of 8 on the mohs scale!
And then there are steel files that have a layer of tungsten-carbide welded to the cutting surface. Tungsten-carbide has a mohs rating of 8.5 to 9! * For more information, see 'Related links' below this box.
no it cannot because its not determined but diamond can absolutely
No.because calcite is softer then feldspar
apatite will not scratch quartz topaz calcite or corundum
Yes
Using the Mohs Mineral Hardness scale, calcite has a hardness of 3. Hence anything with a hardness of 3 or above can scratch calcite (i.e...quartz and fluorite).
Gypsum
No.because calcite is softer then feldspar
the blade would be stronger because the copper would brake easier
Yes it can.
n
calcite
Between 2 and 3 because its hard enough gypsum but it can not scratch calcite because calcite is harder
yes
apatite will not scratch quartz topaz calcite or corundum
The copper of the penny will rub off the file
steel file 6.5
no
Quartz, with a hardness of 7, will scratch calcite, with a hardness of 3.