0
What else can I help you with?
How do you bypass the amp in a 2002 Jeep Liberty?
Well, you do not necessarily have to bypass the amp. If you are using aftermarket speakers, you will have to bypass it, because the speaker will be receiving power from the head-unit AND the factory amp (speakers cannot have 2 power sources). This can be done with a bypass harness from www.crutchfield.com or you can just run your own speaker wires from your head-unit to your speakers. But, you will need aftermarket speakers, because the stock speakers are not designed to just be powered by your aftermarket head-unit, they're designed to be powered by the factory amp. However, if you are using the stock speakers, and just wish to use an aftermarket head-unit (what I did on my 06 liberty w/ "premium infinity sound"), all you have to do is power the factory amp (for each speaker). With a factory amp, your factory head unit sends power to the factory amp, when the car is turned on. Your aftermarket head-unit/harness, is not designed to power a factory amp. For this reason, your factory amp has no power, so you get no sound from your factory speakers. The Fix: Create a power source for your factory amp. People commonly use the "power antenna" wire (used to make an antenna go up/down when the car is started/stopped). This is simply a wire that has voltage when the car is on, and is dead when the car is off. The power antenna wire is located in the back of most aftermarket head-units. Just wire the power antenna wire (the one from the back of your aftermarket head-unit) to the factory amp power wire (this wire was originally attached to the back of the factory head-unit), and it should get power. You should now hear sound from your speakers. Each vehicle has different colored wires, so make sure you look at a 2002 Jeep Liberty wiring diagram for the color of your jeep's factory amp power wire. This can be found online. I know that was a bit lengthy to read, but I wanted to be sure that you would understand! Hope that helps! -alex
Do you need to use only spark plugs and wires manufactured by Saturn on a 1998 SL2?
I used aftermarket wires and did have some trouble with them. I ended up going back to Saturn for new wires. Plugs you can get anywhere. Don't try and upgrade them though, have them give you exactly what came in your vehicle from factory.
What size are the speakers in the center console of a 2000 Lincoln ls?
Center console speakers are prob 2.75"...so nowhere near your aftermarket 3.5". But with a little custom work it will fit nicely. I used Rockford Fosgate P132C Center console speakers are prob 2.75"...so nowhere near your aftermarket 3.5". But with a little custom work it will fit nicely. I used Rockford Fosgate P132C
Are aftermarket auto parts as reliable as factory parts?
As I say, always go for factory parts because they can be more reliable, but if you can't afford them or they aren't available then getting aftermarket parts are a good idea. But they are also a good idea for a short time because they are used.
What kind of wiring harness is used for a 03 Pontiac sunfire in the radio?
For a 2003 Pontiac Sunfire, the radio typically uses a standard aftermarket wiring harness, specifically a harness compatible with GM vehicles. This harness usually contains a combination of color-coded wires that connect the vehicle's audio system to the aftermarket radio, allowing for easy installation without cutting factory wires. It's advisable to check for compatibility with your specific radio model to ensure proper connections.
Can someone teach me where to connect my remote wire for my car stereo if i don t have a amp?
if you are talking about an aftermarket radio's amp turn on wire then without an amp you can just cap it off. if the harness used to connect to new radio to your factory wires has a blue antenna/factory amp then you can connect it to that provided the new radio doesnt have a second blue wire for that purpose.
2000 Nissan maxima non Bose radio distortion at low volume with crackle and static at medium volume. Happened with factory radio and newly installed Alpine radio. Front speakers crackle and distort?
it could be as easy as swapping the wires on your speaker to reverse the polarity also there should be proper speaker wire used for wiring speakers but if they are factory fitted this should not be a problem also check your speakers for any sign of damage what you could do as a test is to swap the wiring for the front speakers with the wiring for the rear speakers if the problem moves to the back speakers then its a wiring problem but if the problem is still on the front then its probably the speaker is at fault the beat way to do that test would be to actually move the speakers temporarily rather than moving the wiring
What are facts about computer speakers?
the technology is used in microphones but in reverse. instead of the wires creating the sound and the cone amplifying it, the cone gets your sound and the wires turn it into electrical energy.
How do you hook up a stereo to your 1988 Mark VII lsc amp?
I have a 1990 Mark Seven and pulled amps and decks out of a few other mark 7s and ended putting in an aftermarket stereo as well as an amp. For the most part we used factory wire harneses with no problems. 400 amps and lots of neighbors... its not worth messing around with, use the factory power wires, antenna, etc, but run new speaker wires forget the stock amp put it in the circular file
What size speakers are in the doors of a 1997 Ford E250 Cargo Van?
The 1997 Ford E250 Cargo Van typically comes with 6x8-inch speakers in the front doors. Depending on the specific trim and options, the rear doors may not have factory speakers, but aftermarket options can be installed to fit various sizes. Always check the vehicle's manual or consult a professional for precise speaker compatibility if considering replacements.
What is RCA wires car radio?
RCA wires in a car radio are audio cables that transmit audio signals from the head unit (the car radio) to external amplifiers or speakers. They typically consist of two connectors: one for the left audio channel (usually white) and one for the right audio channel (usually red). RCA connections help ensure a high-quality audio signal and are commonly used in aftermarket audio systems to enhance sound performance. These wires can also be used for connecting other audio sources like subwoofers or auxiliary devices.
What is the output wattage on the stock stereo in the Dodge Neon 2001?
The stock radio in a Dodge Neon (excluding infinity gold systems) will put out 12-17 Watts RMS. If you pay close attention to aftermarket decks, there is not much difference. Power ratings on head units are very limited, and if you want more power to your speakers, a four channel ampliier is the way to go (I run a Rockford 400.4 to my door and rear speakers, and my head unit [Alpine 9885] is only used to power the two little guys in the dash on my 2004 Neon SXT). It is a bit more expensive, but makes all the difference for anyone concerned about not getting enough power to their speakers. * note: the above amplifier, or any other aftermarket amplier, should NEVER be used in conjunction with factory speakers. They simply will not handle the power.
