Want this question answered?
Oxygen of couse is used to breathe!
Oxygen
An Oxygen Concentrator take atmospheric air passes through inlet filter,muffler and passes to compressor after that air is cooled by using a heat exchange chamber after that air goes through sieve canister.Inside the sieve canister the material called zeolite it absorbs nitrogen from air and gives oxygen as an output.The flow can be controlled by flow meter. 3 way valve is used to controlled by signal gives by pressure transducer.The heart of the oxygen concentrator is sieve canister and zeolitematerial.kannanEngineer99949-54450
Oxygen is used to produce hot flame which is used in welding purpose
If your question is "Why is Acetylene and Oxygen used for welding/cutting NOT Oxygen and air"? This is why. Acetylene and air mixed in correct proportions produces a flame temperature of 4500F to 4800F degrees. Acetylene mixed with Oxygen in the correct proportions produces a flame well above 5500F degrees. This extra heat melts the metal faster and increases the speed you can cut or weld. Other gasses instead of Acetylene are used but do not produce as high a temperature. Oxygen is almost always used with these other gasses.
The oxygen flow metre is attached to either a bottle of oxygen or a medical wall supply of oxygen. This oxygen is pure, as it is 100% oxygen. So, anything that comes out of that oxygen flow metre has a FiO2 rate of 100%. An oxygen flow metre is used with medical oxygen cylinders. This is used for regulating the supply of oxygen to the patient from the cylinder. The gauge ranges from 0-250 K per cm² and the flow-meter range is 0-10 litres per minute. It chiefly consists of gas pressure gauge, pressure reducer, safety valve, flow tube, flow control valve, and humidification bottle, and other parts. Oxygen flow meter is primarily used to regulate the flow of oxygen, oxygen humidification. The working principle of a flow-meter is that the oxygen in the bottle (i.e. Oxygen Source) is reduced by the pressure reducer. The pressure action adjusts from the original high-pressure oxygen to low-pressure oxygen, and after the flow is regulated by the oxygen flow meters, it can be output by the output nozzle at a continual flow value. The normal flow rate of oxygen is usually 6 to 10 litres per minute and provides a concentration of oxygen between 40-60%. This is why they are frequently referred to as medium concentration masks, as 40%-60% is believed to be a medium concentration of oxygen.
High flow oxygen using a non-rebreather mask has been found to be extremely helpful in cluster headache, however in Migraine it is only infrequently found to be helpful.
NO!
Medical oxygen is high-purity oxygen that is used for medical treatments and is developed for use in the human body. Medical oxygen cylinders contain a high purity of oxygen gas.
High-flow systems that employ heated humidifiers and aerosol generators, especially when used by patients with artificial airways, also pose a risk of infection.
Can be used to administer continuous positive airway pressure or free-flow oxygen through the mask
more oxygen is taken up by the muscles/lungs; oxygen is used/needed for energy/ATP production/respiration
Oxygen flow meter is mainly used to regulate the flow of oxygen, oxygen humidification. Whether its performance is accurate and reliable will directly affect the patient's personal safety. Life-O-Line Technologist, as one of the best manufacturer and supplier of oxygen flow meter, provides the same with following features: • The flow meter with humidifier is used in reduction gas pressure and adjusting gas volume, which rescue patient and treat as oxygen therapy by the hospital. • Suitable for all kinds of gas bottle installation. • Precision, functioning based from fine adjustment valve comes with gauze and flow meter. • Specially designed brass material body. • Specially made spindle for the adjustment, adjustable redactor. • Attached humidifier bottle made of polycarbonate plastic material.
In case there is a high altitude decompression emergency.
Oxygen flowmeter is equipment used to control oxygen flow delivery in patients undergoing oxygen therapy. It is mainly used to regulate the flow of oxygen, oxygen humidification. Whether its performance is accurate and reliable will directly affect the patient’s personal safety. It can not only accurately measure the instantaneous flow of oxygen, but also enable healthcare workers to keep abreast of patient oxygen absorption status. Oxygen flowmeter has spread to all levels of medical institutions; township hospitals are also widely used. The correct way to use oxygen flow meter includes: Add distilled water to humidify bottle, the water level in the bottle is within the standard line. Prohibit the use of saline instead. Screw the nut of the flow meter onto the outlet fitting of the oxygen cylinder valve, the pressure gauge and flowmeter should be in a vertical position. Before supply oxygen, insert the gas tube into the inlet, and then the counterclockwise direction to turn the flow adjustment switch to open the source, so that the floats slowly rise. The scale line on the floating ball is the flow reading, the unit is L/min, and the medical gas supply can be adjusted according to the need. In the process of oxygen supply, if the water in the bottle of the oxygen flowmeter is lower than the water level line, the flow control switch should be closed in time and the humidifier bottle should be unscrewed. Add distilled water according to the first item. Then screw on the humidifier bottle to continue oxygen supply. If the flowmeter is not used, the flowmeter source should be turned off. If it needs to be removed, hold the flowmeter by hand and remove it. Then pour the bottle of water for cleaning and disinfection, stored in the non-corrosive and well-ventilated room.
I THINK that blue is used because it is the color of blood without oxygen and red is used because it is the color of blood with oxygen. Also look at your veins see what color they are.
measurement of blood pressure in different parts of the limb xenon 133 studies, which use a radiopharmaceutical to measure blood flow oxygen tension measurements in which an oxygen electrode is used to measure oxygen pressure under the skin