Sure. You can go a couple of ways. You can look for a 110v to 9v transformer, if you can find one, or you can get a 110v to 18v center tapped transformer. If you get the second one, when you hook up the 9v side, you connect between one of the ends of the 18v coil and the center tap. Right now you're thinking, "I said a 9v to 110v transformer, not a 110v to 9v." That you did, but Transformers don't care about that--they'll step voltage up as readily as they'll step it down. (Back when all we had was tubes to work with, transformers with a 6v winding and a high-voltage winding--300v, 400v, 2500v, whatever--were very common because tubes need a LOT of voltage to work.) There are two things you really should think about here if you're trying to take 9v to 110v. First, if your intention was to get line voltage out of a 9-volt battery, stop right here. Transformers only work with AC voltage, and a battery puts out DC. The other thing is, if you've got 9v AC and you feed it into a transformer that will give 1A at 9V, 0.08A at 110V will come out of the unit. Eight one-hundredths of an amp isn't really enough to do anything with. If you want to get 1A worth of 110v from 9v, you need to feed (assuming perfect efficiency in the transformer, which you will not get) 12.5A at 9v, or 25A at 9v if you have a transformer with a more likely 50 percent efficiency. It's possible to step 9v up to 110v, but it's probably not worth your time to do so.
Use a transformer to lower from 220 to 110V.
it can be done at the electrical panel with out a transformer. always have an electrician do it.
The online retailer Amazon currently has an 'Automatic Transformer Adapter 500W 110v/220v 220v/110v' on sale for $38.89. That's 51% lower than the list price of $79.99 and that's before the free shipping!
It would be better if you got a transformer and stepped up the voltage.
Yes, you need a transformer
It is kind of transformers called center-tap transformer its main function is to transform primary voltage to 2 secondary voltages or vice versa. In your statement the transformer will convert the input voltage to 2 voltage each is 9v or the opposite it will convert the 2 input voltages with each 9v to a certain value depending on the turns ratio of the transformer.
of course. go to the market and buy a transformer. It will convert a 110V supply to a 220V supply.
Use a transformer to lower from 220 to 110V.
it can be done at the electrical panel with out a transformer. always have an electrician do it.
NO The radio will actually run at about 6 volts via an internal transformer. If you plug it into a 110v supply you will only produce 3 volts which is the same as trying to run it with flat batteries. The only way is to use a 110v to 240v transformer which will be rather large, cumbersome and heavy.
yes, but you need a transformer to convert it,
The online retailer Amazon currently has an 'Automatic Transformer Adapter 500W 110v/220v 220v/110v' on sale for $38.89. That's 51% lower than the list price of $79.99 and that's before the free shipping!
No
In reality there's no way to do that that'd make sense. In theory you could rewind the 2nd winding to get a higher voltage.
You can this by using the transformer windings.You can create a high voltage pulse through the circuit.As this thing cannot be explained in this so you need to check the related link.
No
It would be better if you got a transformer and stepped up the voltage.