0
Can you connect two Ethernet switches to a third Ethernet switch?
Wiki User
∙ 15y ago
Yes, more than one Ethernet switch be connected to a network. Typically care must be taken as not to create loops in one's network.
Wiki User
∙ 15y ago
Wiki User
∙ 15y agoYes.
Add your answer:
Earn +20 pts
What layer of OSI model is switches on?
Switches are on the second layer of the OSI model (Data Link); they do filtering based on host MAC addresses. You may also see a third layer switch; they not only provide all switching capabilities but some layer three routing capabilities too.
What is the difference between a thin access point and a fat access point?
Wireless LAN Switches: The Best Solution There are two types of wireless access points Intelligent (Fat) and Thin wireless Access points. A fat wireless access point has everything it needs to handle wireless clients. A Thin wireless access point is basically a radio and antenna that is controlled by a wireless switch. If you deploy several Fat wireless access points they need to be configured individually. With thin wireless access points the entire configuration takes place at the switch saving you time and money. Wireless LAN Switches provide many benefits: Wireless Mobility - Intelligent access aren't managed in a central location which means there is no third party monitoring the movement of a user. If a user moves to another work area traditional wireless access points have a hard time passing off the user to the new access point. Thin wireless access points are controlled be the wireless LAN switch who will manage the users movement. Security- Using the wireless LAN switch the administrator can check logs, configure is security settings, make group polices for wireless users all in one spot. Also built in to many wireless LAN switches are RADIUS servers which will give another layer of security on top of your encryption policies. In enterprise wireless networks the administrators biggest fear is rogue wireless access points. Wireless LAN switches can detect when a new wireless access point comes into the area and decide if it is a trusted or non-trusted device. Placement - Power over Ethernet is another great feature of wireless LAN Switches. Power over Ethernet eliminates the need for an power outlet to be near the wireless access point. This saves your company money by not having to install new power outlets. Also this improves security by not having the wireless access points within easy reach of passerby's. If you are deploying a wireless LAN for a company I would be scared if you don't utilize wireless LAN switches and wireless thin access points. The upfront costs of these products are more but your total cost of ownership will be less than having to administer each wireless access point separately. To sum it up home owners should stick with Fat access points and businesses should use thin.
The sakar digital photo frame will not let pictures be loaded it will not go past the words usb connect?
Did you try to click the third button? The one that is not an arrow?
What could prevent a ping from being sent between the PCs?
Theres probably something wrong with the cable wire, or the firewall is turned on and a very strict Network security program was installed. Another answer is the traffic. There may be to much network traffic that the packets sent might be preempted in the process.
How int find third highest salary in a table?
find third highest salary in a table
Where is relay switch on a 95 pathfinder?
There are several relay switch is on your 1995 Pathfinder. Most of the relay switches can be found in the third column of the fuse box.
Where is the relay switch located on a 1990 cadillac sedan deville?
You can find several relay switches on your 1990 Cadillac Sedan Deville. Most relay switches will be in the fuse box. The relay switches will be in the third column of the fuse box.
Where is the location for the thermo fan switches in the 1990 Honda Accord?
The 1990 Honda Accord thermo fan relay switches can be found in the fuse box. The Thermo fan relay switch is will be at the bottom of the third column.
How do I connect a wall light switch that has 3 terminals the third being for the ground Which terminal should be connected to power coming from the breaker box?
How do I connect a wall light switch that has 3 terminals, the third being for the ground wire. Which terminal should be connected to power coming from the breaker box?
Where are the radiator fan switches on a 1997 Oldsmobile Cutlass Supreme?
The 1997 Oldsmobile Cutlass radiator fan switch can be found in the fuse box. The radiator fan switch will be in the third column, second from the bottom.
What switches do you have to press to get in the underground warehouse on pokemon crystal?
To open all the doors, you will have to press the third switch first, the second switch second, and the first switch last. After you do this, the passageway will open. To get the other items in the place, you will have to press the buttons differently, but idk how to do that XP
How do you make a circuit with 3 bulbs 2 switches and and 2 batteries where the 1st switch controls the lighting of all the bulbs and the 2nd switch controls the lighting of the second bulb?
Connect the two batteries for the voltage needed. If they are 12 volt batteries and the lights are 12 volts, connect the batteries in parallel (negative to negative and positive to positive). If they are 12 volt batteries and the lights are 24 volts, connect the batteries in series (negative of one battery to positive of the other). Run a wire from batteries to first switch, then to two of the lights and the other switch (in parallel). From the second switch run a wire to the third light, then connect all three lights back to the battery.
What layer of OSI model is switches on?
Switches are on the second layer of the OSI model (Data Link); they do filtering based on host MAC addresses. You may also see a third layer switch; they not only provide all switching capabilities but some layer three routing capabilities too.
What is meant by the terminology - pole - in switches and breakers?
It is the mechanism within a switch that opens and closes the circuit. An ordinary light switch is classed as a single pole device. Two switches with a common handle is known as a two pole device. A breaker with three switches and a common handle is known as a three pole device. The other terminology that is associated with switches is the word "throw". An ordinary light switches full name is single pole single throw. Its is in reference to the travel distance of the handle. From off position to the on position is a single throw. A double pole throw switch is one that has a stop position half way through the throw. An example is On - Off - On. On (circuit closed in the up position), Off, On (circuit closed in the down position). These types of switches have three terminals to connect to. The center terminal is the common that is usually connected to the "hot" supply or if two separate "hot supplies are connected to the first and third terminals then the load is connected to the center terminal. A perfect example of a two pole double throw switch would be a transfer switch. The utility company is connected to the top terminals, the distribution panel is connected to the second terminals and the generator is connected to the third set of terminals. When the utility power is on, the handle of the double pole double throw switch will be in the up position completing the circuit. On a power failure the handle of the switch is moved to the off position which disconnects the utility company from the distribution panel. Start the generator and move the handle to the bottom position and it will connect the generator power to the distribution panel. When the utility power comes back on line just reverse the process and you will be connected to utility power again.
What is Crossbar Switches and Multistage switch in Space Division Switch?
BOTH CROSSBAR AND MULTISTAGE SWITCHES COMES UNDER CIRCUIT SWITCH(USE IN SWITCHING AT DATALINK LAYER OF WIDE AREA NETWORK(WAN)).AGAIN CIRCUIT SWITCH IS DIVIDED INTO TWO TYPES:1.SPACE DIVISION 2.TIME DIVISIONSPACE DIVISION has two parts i:e crossbar and multistage switches.crossbar switch-A crossbar switch connects n inputs to m outputs in a grid,using electronic micro switches(transistors) at each crosspoint.To connect n inputs to m outputs using a crossbar switch requires n*m crosspoints.The major limitation of this design is the no of crosspoints required.for example:To connect 1000 inputs to 1000 outputs requires a switch with 1.000,000 crosspoints.A crossbar switch with this no of crossspoints is impractical.such a switch is also inefficient because statistics show that,in practice,fewer than 25% of the crosspoints are in use at any given time. The rest are idle.multistage switch-The solution to limitation of the crossbar switch is the multistage switch,which combines crossbar switches in several(normally three)stages.In a single crossbar switch,only one row and one coloumn is active for any connection.so we need n*n crosspoints.If we can allow multiple paths inside the switch ,we can decrease the no of crosspoints.Each crosspoints in the middle stage can be accessed by multiple crosspoints in the first or third stage.The multistage switch has one drawback-blocking during periods of heavy traffic.The whole idea of multistage switching is to share the crosspoints in the middle stage crossbars.
What is the order to drop the animals in the tomb on Nabooti Island?
In the Sand Room, you don't need to reference the animal pictures, as they have made it a lot easier. Look at the little mummy cases next to the switches and they all have dots on their bellies, between one dot and four dots. You pull each of the switches in that order: one dot, two, three, four before the room fills with sand. This means that the order of the switches is far right (fourth switch), middle left (second switch), middle right (third switch), and finally the one at the left (first switch). The little sarcophagus opens to reveal the Blue Jewel.The order "by animal" is cat, parrot, monkey, frog (fourth, second, third, first).
How do you control 4 light in one switch and the same lights control by 4 switches?
You want four switches to independently turn 4 lights on and off. You need two 3-way switches, and two 4-way switches. The first 3-way is located where the power first comes into this system, two travelers (wires) go to the first 4-way switch, two travelers then go from that switch to the other 4-way switch and two wires go to the final 3 way switch. The third wire on the last 3 way switch then goes to the first light fixture. This is a complicated wiring project and it is not as simple as it sounds. Realistically, you will have more than 2 wires traveling between switches depending on whether the neutral is located, and further more dependent on whether power from the panel first comes to a switch or to a light fixture. You need to plan this well or you may have more wires in one or more boxes than code allows. Also, wires must be attached in particular positions on all the switches, or you will end up with a situation where some of the switches will work and some won't and troubleshooting is very complex.
