will muriatic acid aid in removing thin set from the back of ceramic tiles with out damage
It is best to use a white vinegar/water (50%/50%) combination to clean ceramic tile floors. It really works!
Liquid nails would work well. ANS 2 The use of Liquid Nails on ceramic tile is time wasting and very expensive. The best adhesive for this is thinset mortar laid with a castellated trowel.
Very few if any home solvents will harm ceramic tile. 90% isopropyl alcohol will not harm ceramic tile, but this one for example, is very flammable and a spark and ignite it. Care should be taken to protect the surrounding finishes that will be harmed by the solvent in use.
That depends on what needs to be cleaned off? If its rust i use CLR. otherwise i use tub & tile cleaner. to get the grout cleaned use a toothbrush.
It really depends on what type of tile you have down. Muriatic acid is great at cleaning some types of tile. It will really mess up other types. If you head down to the flooring department of your local home improvement store, someone there will be able to talk to you about your specific case. I have spoken to people at Home Depot about the use of muriatic acid in the past. They were very knowledgeable.
Any thinset will workb
yes. Clean tile with a commercial degreaser. scar the surface with a hand sander. mop with clean water, and let dry. Install with fortified thinset.
With thinset.
No muriatic acid cannot etch ceramic tiles because it does not corrode or react with glass or ceramic. That is why muriatic acid is also available in glass bottles.
Thinset mortar. There's a special one for porcelain tile; any thinset will work for regular ceramic tile.
Yes
Yes, if the adhesive is smooth, no lumps and if you use a compatible glue, not thinset cement
# The floor was unlevel before the tile was installed. # The thinset was to dry or did not cover the back of the tile 100% # The floor is settling # It was installed onto an improper subfloor
it could be a number of things, premixed thinset, to much flex in the substrate, mixed thinset too thin, didnt seal grout "if in shower" where is the tile installed, what did you use to install it and how did you install it?
Not directly as the ceramic tiles will soon show through the vinyl flooring. If the ceramics are laid on a wooden floor, you must take up the tiles and overboard with 6mm plywood. If the tiles are on a concrete floor, you can leave them down and lay a latex screed on top to provide you with a smooth floor for your vinyl
Just go to your local hardware store and tell them your problem and they'll select a good bonding material for you. ANS 2 - Ceramic tile thinset cement, with latex additive.
It is best to use a white vinegar/water (50%/50%) combination to clean ceramic tile floors. It really works!