The ECM on a 1992 S10 Blazer is located below the glove box.
The ecm would be in the passenger side kick panel.
AnswerThe ECM is usually located under the glove box.
under the dash
The ECM unit for a 95 S-10 Blazer is located under the hood on pass. side.. Right in the open.
There is no ECM in the 1985 S10, it is carbourated.
yes on top of ecm
which fuse is for the fuel pump in a 1993 chevy s10 blazer
any s10 or sonoma up to 93 and any blazer jimmy up to 94
yes, most of the parts are interchangeable from the blazer to the pick up.
You don't, it is done by the ECM (Engine Control Module).
Mounted to the main ECM (computer) under the passenger side dash.
See the related link for fueleconomy.gov.
It can be done, but you would need to use the ECM from the 2001 engine.
No, it will not work. The 86 is a mechanically controlled transmission, vs. the electronically controlled transmission of the 96 (which also means the engine ECM will be programmed to function with that electronically controlled transmission).
Any 1983 - 1993 S10, and 1983 - 1994 Blazer, Jimmy, or Bravada.
Behind the passenger side kick panel.
under the dashboard on the passenger side. take the kick panel out and u will see it
The temp sensor for the ECM (engine control module) is next to the thermostat housing.
With a signal from the ecm it powers up the fuel pump.
There is no timing to set. The timing is controlled by the ECM with signals it receives from various sensors.
Assuming this is the 4.3L engine, one.
what is the wheel base for 1985 s10 blazer