Yes, you can but you won't get the true colors displayed on the TV. The component cable uses 3 leads (green, blue, and red) for the video where composite only uses 1 (yellow). The audio is white and red for both types of cable.
Connect the satellite receiver to the surround receiver. You can then use the receiver to switch between this source and the the DVD or Blu-Ray player.
You can connect your standard definition TV to your satellite receiver in a couple of ways. First, if your TV has composite video/audio inputs (yellow, red, and white RCA jacks), you can connect to these inputs using the composite video outputs of the satellite receiver. Another alternative is to use the standard coaxial cable output from your satellite receiver to connect to the 75ohm antenna input on your TV. *Note: Neither of these connections will display high definition programming on your standard definition TV. The TV is only capable of standard definition, so you will see a clear picture, but it won't be true high definition, regardless of the input signal's definition.
check first your satellite receiver if there is an HDMI jack. connect your HDMI cables from your satellite receiver to your tv tuner. if you don't have the HDMI jack, check the AV output jack. connect the AV cables from your satellite receiver to your tv tuner. you can use either AV or HDMI.
no yes
and my composite cable is a phono cable n the cable is for my ps3
You could use an external cable or satellite receiver and connect speakers to that.
You can connect your DISH receiver to your Bravia TV using one of 4 methods: Coax cable connected to your coax port (non HD receiver) RCA (composite cable) - yellow, white, and red tips Component cable/ audio cable - Green, blue, red, white, and red (white and red for audio), HD receiver or HDMI cable (HD receiver). The component and HDMI give the highest video and audio quality. To receive HD programming, you need an HD receiver and HD programming package.
This depends on the brand your satellite tv receiver is. If your receiver is for example, Dreambox, than you could connect it to a computer via the RS232 port or via the ethernet port located on the Dreambox receievr. On other brands, this may be different. On some brands you can not connect a tv receiver to a computer. So this is different for all receivers. Also, some special softwares would be needed to establish the conenction between computer a receiver.
Since your satellite receiver is not HD, you can use either a coax cable or an RCA cable to connect to your TV. The Wii can plug into a composite port. If you only have 1 RCA/composite connection on your TV, you can get an A/B switch so you can have both devices connected so you can switch between the two devices.
Dreambox works like all satellite tv receivers work. It decodes the signal coming from the satellite and allows you to watch satellite tv channels on your tv. You connect the dreambox to your satellite antenna, than connect it to your tv, and do an auto scan, and you can watch satellite tv channels on your tv. Almost all Dreambox are HD, so you can watch HD channels using dreambox receiver. Dreambox is a more advanced satellite receiver, allowing users to gain more control over the receiver and uses advanced softwares and ecryptions. This is why it is considered to be among the best satellite tv receivers.
The fit a cable to an external aerial dish, one must check the satellite receiver to find the coaxial socket. Connect the cable from your satellite receiver to the external antennae socket.
Component video is carried on three wires, normally referred to as YUV or Y, Pb, Pr. The Y component carries the luminance information - the brightness. The other two carry color information. Connecting a component signal to a composite input will be difficult as composite uses a single connector that carries brightness and color signals on the same wire. If you connect the Y of the component signal to the composite input, you will see a monochrome image. With a very, very few exceptions, analog component video is limited to standard resolution, so the highest will be 480 line (North American) or 576 line (European). Composite connections handle only standard definition and there is no composite standard for HD video.