Definitely not it could be dangerous. AC and DC can't be interchanged in general.
Yes - you just need a transformer that will step down the voltage by a factor of 19:1
No, the two systems need a different coil resistance.
Input: AC 100-127 Output: DC 12V
A: As a DC source change state rapidly this variation is consider an AC component
A DC to AC inverter takes a DC voltage input to a AC voltage output. So if you have a 12v battery and need to run a 120v AC tool or something. All you need to do is plug a inverter to your battery and plug your 120v tool the the inverter. Takes all there is too it.
rectifierac motor - dc generator set
If you want to convert 24v AC into 12v Ac, it's simple. Just get a transformer to convert 24 volts into 12 volts. This is called a stepdown transformer. If you want to convert 24v DC into 12v DC, it's more complicated. First you have to change the 24v DC into 24v AC by a switching converter that changes DC into AC. Then you would use a stepdown transformer as in the former example. Once the 24v AC is converted to 12v AC, then you use a rectifier bridge to change the 12v AC into 12v DC.
The purpose of rectifiers is to change AC to DC.
DC 12V power supply can convert 110/220V AC power source to 12V DC.
AC or DC? AC - use a transformer, DC - forget it - not simple or cheap.
AC or DC? AC - use a transformer, DC - forget it - not simple or cheap.
ful circut diagram ac to dc adapter 12v dc
You'll probably have to have a step-down transformer to take the 220vac down to 110vac. Then you'll have to have an Ac to Dc converter box to change the Ac to Dc volts. The converter will probably have an adjustable output so that you can dial in 12vdc.
A: Microwaves are AC frequency in the very high spectrum. And no they do not change AC to DC
by the use of inverter we can convert ac to dc.
depends on your load...
You can not change AC into DC using a transformer. A transformer changes the voltage levels. To change AC into DC, you would need a rectifier. To change that into smooth DC you need a capaciter and a voltage regulater
No, the two systems need a different coil resistance.