If when you say fix you mean repair the one you have then No. It is a sealed unit and can not be repaired. If when you say fix you mean repair the one you have then No. It is a sealed unit and can not be repaired.
Wiki User
∙ 2007-05-21 23:21:22The only way to fix the dimmer switch is to replace it I have tried cleaning it lubercating it. nothing will fix it for good .so i had to replace it. It is a factory item.
could be the neutral saftey switch .
P0705 is the code for the transaxle range signal malfunction. It can be caused by faulty park/neutral position switch, misadjusted park/neutral position switch, the park/neutral position switch harness shorted or the park/neutral position switch circuit having a poor electrical connection. Try changing out the switch.
under the hood by the engine
you cannot fix that you have to purchase the whole thing.
take the dead mouse out of the vent.
Usually not repairable, you will have to replace the complete multifunction switch.
If the neutral safety switch is only working intermittently, some of the screws may be loose or the switch may have gone out of alignment. You can use a 12-volt test light to check the switch. If there isn't any power running through the wiring, you will need to replace the switch.
any auto transmission car that starts in neutral and not in park has a problem with the safety switch. Fix it or bypass it.
PO705 is a short in the transmission range switch circuit. This is normally caused by one of the following.Faulty park/neutral position switchMisadjusted park/neutral position switchOpen, shorted, or loose electrical connection at the switch.
You replace it you do not fix it.
u have to take the hole thing apart to get to a small screw to take the switch out