No a 230 volt appliance should not be pluuged into a 110 volt socket (And vice versa) you need to buy a converter that can be plugged into the 110 volt outlet then the appliance can be plugged into the converter.
Just use a step up transformer. If use a step down transformer of 230V to 110V , use the outlet for inlet and vice versa.
Absolutely not!
Yes, 220 volts is in the same voltage classification as 230 volts.
Yes, but a fact has to be taken into account that when a 230 volt rated bulb is used on a 120 volt system the wattage output is half of what the 230 volt bulb is rated at when it operates on 230 volt. So the dimmer will only be used to control half of the bulbs wattage which could bring the bulb down to a dull glow in full dimming position.
230
The classification of 230 volts is in the low voltage range.
no
No, if it says 230-240 .. 230 is the minimum..
A 12 volt battery will not hurt you BUT any POWER supply (especially a 230 Volt one) has the potential to harm you.
Different system, US uses 110 volt. I think India uses 230 or 240 volt.
Because the capacitor only needs to "excite" one of the two phases of the 230 volt supply in order to start the motor.
Http://www.micro-reducer.com Contact:Qin email:maili.motor@gmail.com
no
110 deg C = 230 deg F.110 deg C = 230 deg F.110 deg C = 230 deg F.110 deg C = 230 deg F.
No.
no
No totally different
If you are talking about a 6 volt coil, yes, so long as the contacts are rated for the 230 volt circuit. If you are talking about 6 volt contacts, no, absolutely not.
2kw = 6,827 Btu/ Hr 5kw = 17,076 Btu/Hr 5kw yields 10,249 Btu more /Hr