yes, its a possible but it depends on the drive train, your gear ratio, and if its an automatic or manual.
You Can Put a 1988 Transmission In a 1993 Mustang Body.
How to put manual transmission on mustang 1988
A better question is why would you want to put a ranger transmission on a mustang
automatic..... dipstick under hoodstandard..... remove fill plug located on transmission and put fluid till it starts to come out. replace plugit is a standard...what kind of fluid does it take?====================================================Motorcraft MERCON automatic transmission fluid is used in the 5 speed manualtransmissions in a 1998 Ford Mustang ( and Mustang GT )
Your mustang with a manual transmission takes automatic transmission fluid. the capacity is 5.6 Pts (US). The fill plug is located on the side of the transmission. Macs Transmissions 281-394-4951 Macstransmissions@gmail.com
Motorcraft MERCON - V - automatic transmission fluid ( I believe it is stamped into the automatic transmission dipstick )
put some transmission fluid in it
yes you can but you will have to change the transmission and shorten the driveshaft a few inches
Not directly, this swap will take A LOT of modification to work. You would NOT want to use the original transmission with the newer 5.0 motor. You would at least want to put the newer model transmission to go with the newer model motor. Either way it will take A LOT of modification to achieve this swap.
Time for a rebuild.
as long as its dot three it will work it does not have to be a brand name like motorcraft
Anything is possible, but one has to weigh the amount of modification required versus the benifits.