The pull chain on the porcelain light fixture can be converted to a wall switch very easily. You will need to install a new two wire #14 cable from the box the fixture is mounted to now to the new wall switch box. Remove the power to the circuit by shutting that circuit's breaker off. The wire that is connected to the switch in the light fixture is the incoming "hot" wire. Disconnect it and re connect it to the black wire that goes down to the switch. Disconnect the white wire from the old porcelain fixture. For the installation of the porcelain fixture connect the white wire to the silver screw on the new fixture. Now connect the white wire that returns from the switch to the brass coloured screw on the new fixture. Mark this white wire with a small piece of black electrical tape to re identify it as not a neutral (code rule) but a potential "hot" wire. At the switch end make sure that the black wire is connected to the top screw and the re identified white wire (with a black tape marker) is connected to the bottom screw of the switch. Connect the ground wire in the cable to the new switch box and the existing fixture box. Install the switch making sure that the switch is in the off position and that the handle in facing downwards. Install switch plate cover, turn the breaker back on and you are finished. <><><> This project is relatively easy to do if there is already an existing wall box close to the pull-chain switch BUT ONLY if it already has the right wiring in it.
If there is no such wall box then a new one will have to be installed and wired. If you already know how to do that safely you would not be asking this question here!
For some relevant information, please see the related question below about replacing a wall switch by a pull switch. <><><>
As always, if you are in doubt about what to do, the best advice anyone should give you is to call a licensed electrician to advise what work is needed.
Before you do any work yourself,
on electrical circuits, equipment or appliances,
always use a test meter to ensure the circuit is, in fact, de-energized.
IF YOU ARE NOT ALREADY SURE YOU CAN DO THIS JOB
SAFELY AND COMPETENTLY
REFER THIS WORK TO QUALIFIED PROFESSIONALS.
You could turn on the light at pull chain and then install a remote switch in series with the black wire supplying the light. However, if the light is turned off via the pull chain, the remote switch can't turn it back on.
Yes, just mount the pull chain light and then leave the wall switch to the on position. You can now turn the light on off with the pull chain.
Installing a pull chain switch into an existing fluorescent lamp includes both mechanical and electrical issues. One has to change the wires and the switch mounts to have the two be compatible within the same fixture.
If you are adding the pull chain to an existing fixture then the pull chain switch should have two wires. Wire nut either one to the hot wire coming in and the other to the black wire of the fixture.
how do you hook up an outlet to a pull chain light without the outlet shutting off when you pull string
A pull chain connector. really.Bead chain connector. See related links below.
They are the weakest link and will release the chain if pulled too hard. They keep you from breaking the original chain, some of which goes inside of the fan and very time consuming to fix.
Pertaining to what? A light switch, an oven light, a pull chain type lampholder....???
Chain switch is an old term for identifying the chain or string that hung from light bulbs that illuminated rooms in homes of the past. Light bulb sockets equipped with a "chain switch" or pull line of metal beads and a string can still be purchased at local hardware stores.
Two options. Change the fixture to a keyed pull-chain, or add a pull-chain adapter to the existing fixture. Both available from Home Depot and others for about $3.
I had the same experience. If the fan turns on/off with its pull chain but the light doesn't, then the switch behind the light's pull-chain is broke and needs to be replaced.
A pull-string or pull-chain switch IS a light switch. Some other types of light switches are called wall switches and cord switches.For more information see the answers to the Related questions shown below.
pull out the light switch
No.
With main switch light just pull
pull out light switch
yes
If the question is, can I wire a switch to an existing light fixture (and I must assume that it's something like a pull-chain light fixture), the answer is yes.If the question is, "how do I wire a switch to an existing light fixture that has no external switch", the answer is, "in series".The attached web site gives simple instructions on how to wire a basic light switch to an existing light.See sources and related links below
Look inside the light kit where the light pull chain turns the light on/off. You will find a black box and trace these wires to the pull chain and light if they are not clearly labeled.