Volts Alternating Current, range from a transformer and sometimes the distance of the transformer providing the volts may cause a range anywhere from 110vac to 130 volts alternating current. as long as you are within this range what ever you have should run with what voltage is provided. Yes it is all the same, it just varies.
Basically yes. The 5 volt difference seems to depend on where you live more then anything. As far as I know all appliances rated at 115 v will work fine on a 120 v line and vice versa. Most power distribution companys work a + or - 10% factor. Usually the voltage is monitored much tighter that 10% but it is a bit of an out it the voltage goes a bit higher or lower. Like the above answer states it is just a nominal figure that incorporates the 10% factor. eg. 110 - 120V, 220 - 240V, 440 - 480V, 575 - 600 volts.
No. 125 Volts is 5 Volts higher than 120 Volts.
Yes, 120 and 115 volts are a nominal figure in the same voltage range. It is brought about by the power company, as they have a responsibility to keep voltages within a certain 10% range.
In Europe 240 volts is standard, so no a 115 volt motor will not work. In USA 120 volts is standard, so if your sub-panel has 120 volts, (check with voltage meter) then yes. Read carefully, To get 240 volts in a sub-panel in USA the electric company brings two (2) wires, each wire has 120 volts, 120 + 120 = 240. One of those 120 volts will run your motor. Look for the wires from the electric company and check them with your voltage meter. If this is a commercial application you will need to call an electrical contractor, power companies for commercial applications do not follow the above.
Yes. All Canadian regular household outlets work at 110-120 Volts.
There is no problem with that voltage. As long as the voltage is plus or minus 5% of the nominal voltage of 115 volts it is considered to be in the 120 volt range.
The appliaance is designed for 110-120 v so if it is fed at 115 v that is quite OK.
120 Volts and 115 Volts refer to the same thing in the US. Residential electricity is provided at 120 Volts from the utility. High current devices such as motors are often rated at less than the supplied voltage (such as 115 Volts) because it is expected that there is a small amount of voltage drop in the circuit feeding them. The National Electric Code allows a 5% drop in voltage from the electric service so a 5 Volt drop from 120 Volts is OK.
yes, most 115 volt devices will work with any voltage from 100 to 130 volts with no problem.
In Europe 240 volts is standard, so no a 115 volt motor will not work. In USA 120 volts is standard, so if your sub-panel has 120 volts, (check with voltage meter) then yes. Read carefully, To get 240 volts in a sub-panel in USA the electric company brings two (2) wires, each wire has 120 volts, 120 + 120 = 240. One of those 120 volts will run your motor. Look for the wires from the electric company and check them with your voltage meter. If this is a commercial application you will need to call an electrical contractor, power companies for commercial applications do not follow the above.
Yes. All Canadian regular household outlets work at 110-120 Volts.
There is no problem with that voltage. As long as the voltage is plus or minus 5% of the nominal voltage of 115 volts it is considered to be in the 120 volt range.
The appliaance is designed for 110-120 v so if it is fed at 115 v that is quite OK.
Yes. The voltage of 120 volts is a nominal figure. The utility company has a plus or minus tolerance from 110 to 120 volts. This tolerance is based on the figure of 115 volts.
120 Volts and 115 Volts refer to the same thing in the US. Residential electricity is provided at 120 Volts from the utility. High current devices such as motors are often rated at less than the supplied voltage (such as 115 Volts) because it is expected that there is a small amount of voltage drop in the circuit feeding them. The National Electric Code allows a 5% drop in voltage from the electric service so a 5 Volt drop from 120 Volts is OK.
No country in the world uses 138 volts. They use 100, 110, 115, 120, 127, 210, 220, & 240.
If that is the information that is stated on the nameplate of the device then yes it will operate on 120 volts.
Yes - usually house voltage varies from 110 to 120 volts.
For electrical purposes 110-115-120 is all the same.
Yes you can safely do this. Most appliances that are marked 115 volts will operate on outlet between 110 and 120 volts safely.