My suggestion is no. We just moved into a home that we are renting and we had layers of build-up. It was wax build-up from the Mop n Glow that was used to clean the floors, plus the cleaner attracted more dirt. Just layers of wax and dirt. The floor was awful. I had a professional cleaner come in and clean it for me. The guy who cleaned my floors suggested Swiffer Jet mop and cleaner which I love. He also suggested buying a neutralizer type cleaner which can be found at Lowe's or Home Depot. Dish detergent can also be used on the floors as a degreaser.
Yes, you can use a steam cleaning machine to clean ceramic tile. Depending on the type of machine, you may need to change the level setting to the highest setting in order to clean the tile completely. Many people use steam mops for this type of tile.
Yes, Pine-Sol can generally be used on ceramic tile. It is a multi-purpose cleaner that can effectively clean and disinfect ceramic tile surfaces. However, it's always a good idea to check the manufacturer's instructions or test the cleaner on a small, inconspicuous area of the tile first to ensure compatibility and avoid any potential damage.
Ceramic floor tiles can be cleaned with any cleaning products- with the exception of comet or any type of gritty abrasive cleaner- (do not use-comet or any abrasive cleaners on ceramic tile- the tile will scratch- You can use all other types of cleaning supplies on ceramic- liquid soaps- pine sol-degreasers etc- Muriatic acid or any other corrosives are a little strong too- But Tile is very Durable and can be cleaned with most any thing except abrasives and corrosives-
The use of the words porcelain and ceramic to describe tiles is somewhat confusing as most are described as ceramic, then divided between porcelain and non-porcelain. The main differences are that porcelain tiles are denser, smoother and more impervious to moisture, whereas ceramic or non-porcelain tiles are softer. Therefore porcelain tiles are more suitable for areas that get harder wear.
There are many options to choose from, but the one that has the most praise and the best results is Eureka EnviroSteamer, there are many people who use and have given great reviews about it.
Use a 50%/50% mixture of white vinegar and water. This works!
Mop and Glo is not a good product to use on engineered wood flooring. This because Mop and Glo contains a wax, which can ruin the finish that is already on the floors.
NO! Leaves a white dull film.
yes
Use a good mastic or adhesive
It is best to remove the vinyl tile. If it is not on cement and is on wood you can install cement backer board. Be sure to put thin set under the board. If you spend the money and time to install ceramic tile and the vinyl tile comes loose all that $ is down the drain What is the best tile cement to use and this cement tile can be installed on vinyl tile and install ceramic tile on it
If it's ceramic tile use a knife or scissor and scrape it off. Ceramic is virtually indestructible.If its linoleum use nail polish remover.
To cut ceramic tile, use a tile cutter or a wet saw. With a tile cutter, score the tile's surface using a scoring wheel, then apply pressure to break it along the scored line. A wet saw uses a diamond blade to make precise cuts, with water cooling the blade.
It is best to use a white vinegar/water (50%/50%) combination to clean ceramic tile floors. It really works!
Tile is a building material you can use in commercial and residential use. There are certain kinds of tile you can use and they can be installed indoors and outdoors. You can choose between ceramic tile, porcelain tile, glass tile, slate, natural stone tile, and other types.
Granite
yes you can a lot!