0
What else can I help you with?
Can you use muratic acid to clean dishwashers?
Muriatic acid can be used to clean dishwashers. Muriatic acid is very strong and should only be used occasionally for cleaning the dishwasher.
Can you substitute muratic acid for battery acid?
No, you should not substitute muriatic acid for battery acid. Battery acid is typically sulfuric acid, which has different properties and concentrations than muriatic acid. Substituting one for the other can damage the battery and may be dangerous.
Can you use bleach to clean slate?
It is not recommended to use bleach to clean slate as it can damage the surface and alter its natural appearance. Instead, use a mild detergent and warm water solution to clean slate surfaces effectively.
Can you use sulfamic acid to clean lime and scale deposits off your slate tiles?
Yes, sulfamic acid can be used to clean lime and scale deposits on slate tiles. It is effective in breaking down these deposits without damaging the slate surface. However, it is important to follow the manufacturer's instructions and use proper safety precautions when handling sulfamic acid.
How do you clean tar off a driveway?
A strong chemical cleaner will be needed to remove tar from the driveway. Muratic acid, or something similar should soften the tar. use all safety precautions.
Can you use pinesol to clean slate floors?
Yes...my proffesional house cleaner says that it what they use to clean most if not all slate floors in homes.
How can use slate in a sentence?
She wrote her daily schedule on a slate hung by the door.
How do you clean concrete with muriatic acid?
That depends on what you're trying to clean off. Technically, muratic acid removes some of the chemicals that make up the surface of the concete. If the stain is deep you'll need to use a stronger concentration of the muratic acid. If it's just a weak surface stain, you can dilute the acid. The muratic acid will destroy any clothing, especially cotton, that it touches. Even a drop will disolve the cotton where it touches. Concentrated muratic acid that gets in your eyes can cause blindness, so make sure you wear something to protect your eyes. It burns if you get the acid on your skin, so wear gloves and have plenty of water nearby. Beyond that, just put water in a plastic pail then add muratic acid to get to the concentration that you want. I use an automotive wheel cleaning brush to clean with muratic acid, I also wear rubber gloves when I'm using the stronger concentrations. Brush it on, work it a little then rinse it off with water. It takes a small amount of concrete off the surface and changes the appearance of the concrete, but it also removes the stain.For cleaning concrete, I would recommend using a citrus degreaser instead of muriatic acid. It is much more environmentally friendly, and you don't have to be a chemist to use it. You can purchase it at any professional construction material supply store. Available in 1 gallon and 5 gallon. It also smells a lot better than muriatic acid!!
Can you use muratic acid to help remove a corroded washing machine hose?
Muriatic acid will clean away corroded metal nicely, however you have to treat the stuff carefully as it is very corrosive. suggest rubber gloves and good quality eye protection.
How do you lower the PH Alkalinity in a above groun pool?
use muratic acid to bring down Ph and TA
What can you use to clean a cement pool deck around an in ground pool. The cement is turning black and is very dirty-needs a good spring cleaning?
Muratic Acid is the best to clean concrete. You can buy it at Lowes or Home Depot. It has to be diluted with water first.
How do you use muratic acid to clean buildup in cell of a chlorine generator in salt water pool and What are the proportions of muratic acid and water that you pour in to the cell unit?
To clean buildup in the cell of a chlorine generator, first, disconnect the power and plumbing to the cell. Then, create a diluted muriatic acid solution with a ratio of 1 part acid to 10 parts water. Carefully pour the solution into the cell and let it sit for a few minutes before gently scrubbing the buildup with a soft brush. Rinse the cell thoroughly with water before reconnecting it to the system.
