If you are asking can I put a 10 amp fuse in instead of a 5 amp ,the answer is yes. However do not leave it in there. It is ok in an emergency, if the 10 blows right away , then you will have to find your problem.. Always try to keep the proper size fuses installed. If you are asking can I put a 10 amp fuse in instead of a 5 amp ,the answer is yes. However do not leave it in there. It is ok in an emergency, if the 10 blows right away , then you will have to find your problem.. Always try to keep the proper size fuses installed. If you are asking can I put a 10 amp fuse in instead of a 5 amp ,the answer is yes. However do not leave it in there. It is ok in an emergency, if the 10 blows right away , then you will have to find your problem.. Always try to keep the proper size fuses installed.
No. If you use a larger fuse you are not protecting the device which has a rating of a lesser value.
A fuse is given a various rating (strength). For instance, a home appliance (washing machine, etc) would usually have a fuse with a 13 amp rating. While a low powered lamp would only merit a 2 or 5 amp fuse rating. It is important to use a fuse of the correct rating in amps for each electrical appliance.
Yes, and you should use a time delay fuse.
Yes, as long as the amp rating is the same. Examples, 600v 100amp fuse can be used in a 120v 100 amp's location.
Assuming the wiring is sized for 12 amps, you can replace your fuse with any 12 amp fuse or smaller and with a voltage rating at or above what you expect to connect to it. The amp rating protects the wire, so you cannot go above what the wire can handle. The voltage rating is the max voltage that it can safely protect, so you cannot use a fuse with a lower voltage rating than you expect to connect to.
If it fits and has the same voltage & amp rating you can use the fuse/relay.
It is ok to use a fuse with a higher amperage rating and not ok to use a fuse with a smaller amperage rating why?
Use the correct fuse and nothing else.
NO! Using a larger amp fuse defeats the purpose of the fuse to protect the wiring in the circuit. This can cause a fire. Always use the correct amp fuse for that circuit.
NO! Using a larger amp fuse defeats the purpose of the fuse to protect the wiring in the circuit. This can cause a fire. Always use the correct amp fuse for that circuit.
fuse number 1 is 10 amp fuse 2 is 25 amp fuse 3is 25 amp fuse 4 is a spare fuse 5 is 10 amp fuse 6 is a spare fuse 7 is 20 amp fuse 8 is 25 amp fuse 9 is 20 amp fuse 10 is 5 amp fuse 11 is 5 amp fuse 12 is a spare fuse 13 is 5 amp fuse 14 is 15 amp
The short answer is, Yes. But here are the issues at hand: If you require a 15 amp circuit you cannot go smaller. Voltage of a fuse is determined by the voltage applied. You may not have 250v. You can use a fuse with a higher rating than the supply but not smaller. Wire size is determined by overcurrent protection, which is your fuse, so if you use a larger amp fuse you must determine if the wire is large enough to handle it. Do not guess. So the long answer is, Any 15 amp fuse with a voltage rating at or above the supplied voltage will work if properly installed.