1. Low vacuum at high loads
2. High HRH temp
3.High steam flow
4. high gland steam temperature
There has to be a built in expansion chamber or release valve. Otherwise the expansion would cause an explosion.
inconsistent load will cause steam turbine hunting.
Expansion and contraction can cause things to crack, as in the weathering of rock. They can cause a bi-metal strip to bend and straighten, which phenomenon is used in some thermostats. Expansion can cause the roadway of a bridge to buckle, so gaps have to be left. Obviously they cause the thread in a liquid-in-glass thermometer to get longer and shorter.
If,clamp is not proper fitted in control oil line that time it may happen cause in control oil line pressure also more than main oil pump disch.
carnot cycle is a very ideal cycle that isn't practical at all , 'cause we add and reject heat isothermally , a wet mixture enters the turbine so it'll cause pitting and erosion and a wet mixture enters the pump , and the pump can't deal with a 2 phases fluid rankine cycle is a practical cycle but with a very low efficiency so the main difference lies in the adding and rejecting of heat
There has to be a built in expansion chamber or release valve. Otherwise the expansion would cause an explosion.
becuase of the increase in movement of molecules
yes it will be big damages for both that's y fixing differential protection relay between both
An increase in total expenditures affect the nation's economy would cause an expansion.
The temperature contrasts would cause differential expansion of the bottle which, being brittle, would cause the glass to crack.
inconsistent load will cause steam turbine hunting.
turbines spin when there is a cause of wind..!!
There are several causes that can cause a generator turbine system to lose power. The most common cause is a lack of fuel.
There are several causes that can cause a generator turbine system to lose power. The most common cause is a lack of fuel.
Differential Diagnosis
It's called expansion, or thermal expansion. It's usually noted by the Greek character alpha.Most materials have alpha values greater than zero, so the thermal expansion occurs when temperature increases. However, some other materials have negative thermal expansion, as happens with water. Liquid water will increase its volume under cooling conditions below ~4 ºC. It will also increase it's volume as the temperature rises away from 4o C.
stuff