i have 85 cavalier how you get key cycliner out
No.. the chip "so-to-speak" is integrated into the key lock cylinder.
how do i get a replacement key for a 2001 chevy cavalier
Type your answer here... uninstall 1995 Chevy g m c truck key cylinder
Take it to a mechanic so you don't break more things by replacing it yourself
can I switch ignition cylinder with a different ignition cylinder w/key in a 2004 chevy Malibu without having to use a passcode
not th stock one
It's the cylinder or the key is worn down. Once I ran into a problem where the cover on the wafers rose up and was hanging in a slot in the cylinder housing, but the key would turn but not far enough to start the car. But if it wont turn, I would suspect the key or something sticking inside the lock.
I have a 97 Cavalier,,,and one key does the door , ignition and trunk.
All Cavaliers from '94 to '04 use a 3/8 Allen key on calipers.
Yes, exact fit! Just change the ignition key cylinder to retain use of same keys.
take your vin and title to the dealer or a lock smith
Yes, exact fit! Just change the ignition key cylinder to retain use of same keys
A good locksmith has access to this info, or can get this info from GM. But if you have the key he can read the cuts on the key and give you a key cutting code.
It probably is the key switch.
The steering and ignition will become locked on a 97 Chevy Cavalier if the key is not inserted into the ignition and turned. This helps to prevent theft.
YOUR KEY AND OR LOCK CYLINDER IS TOO WORN.
Without the key you are going to have to drill it out.
Lock smith! They can either open the door or make you a duplicate key (no master key needed).
try to drill strate trough it than you should be able to turn it but dont drill to far
the trunk button is located on you,re key chain transmitter.
My 2003 Cavalier uses a 3/8 hex key. It probably should be the same.
A locksmith may be able to remove the broke key and make a new one. Or just replace the ignition.