Want this question answered?
You will need to take the box into your local board to have them deprogrammed it for you.
If the Vaultz lock box has a combination lock, you need the combination to open and/or reset it. If it has an actual key lock, one can be ordered from the company.
A combination lock box is very safe for protecting goods. However, it depends on the type of lock, the type of material that the box is made from in order to determine how safe it is.
look online to see if you can find out how by typing in the model type. if not, return it to the store
look online to see if you can find out how by typing in the model type. if not, return it to the store
http://www.thepontiactransampage.com/glovebox.html
One can purchase a combination locking key box from a local locksmith shop. One can also purchase this item from the online stores Master Lock, Amazon, Staples, Pittman, Argos UK and Roper Lock.
I have a vintage lock box with two dials, I know the combination but I can not figure out how many times to spin the dials.
put the prime numbers in to the box! To solve the mystery!
cars dont have a governer if you mean the retareder or stutter box it is programed into the cars computer. if you want to change the rpm in wich it stutters you have to reprogram the ecu
For 2020 series model, the key lock for the shackle is located inside the vault. Unlock the lock box lid with last combination preset and use the "Reset Key" provided to release the shackle. For 2040 series model, the combo lock for the shackle is located on the top of the lock box. Unlock the lock box lid with last combination preset and press the "Release Button" provided to release the shackle. Visit http://www.nusetlock.com or call toll-free 800-60-NUSET for details.
Opening Instructions:I. Slide the lever (located above the dials on the front of the lid) down to open the lid.II. Lift the lid from the security lock box to place or remove the keys inside the vault.Resetting Combination Instructions:1. Your NuSet Security Lock Box is factory preset to 0-0-0.2. Open lid using the "Opening Instructions" Step I & II from above.3. Lift the lid from the security lock box.4. Make certain the lever remains up in the closed position with the last combination set.5. Insert the "Reset Key" (included) all the way into the side of the lid and make a 1/4 turn.6. Once the key has been turned, roll the dials one at a time until the desired combination is aligned.Tip : Write down the new combination to prevent loss of the new combination.7. After the new combination resetted, return the key to upward position and remove it from the lid.8. Very Important! Check combination before placing the lid to the lock box body. Return the lever to closed/up position. If the lock retracts, the combination has been successfully changed.Please visit NusetLock.com or call toll-free 800-60-NUSET for details.