0
This depends greatly upon the temperature the water. At 4oC the density is approximately 1000 kg/m3 (or 1 g/cm3) - more acurately though the density would be 999.97 kg/m3 (or 0.9997 g/cm3).
Values for the density of pure water (H2O) have been calculated over a wide range of temperatures. At room temperature (22oC) The density of water is 997.77 kg/m3 (or 0.99777 g/cm3)
Wiki User
∙ 12y ago
The density of fresh water is around 1,000 kilograms per cubic meter at 4 degrees Celsius. This value may change slightly with temperature, but it remains close to 1,000 kg/m^3.
Wiki User
∙ 11y agoUsing standard SI units: 1000 kilograms / cubic meter.
Wiki User
∙ 14y agoThe density of pure water at 4oC at sea level is 1.0 g/mL, or 1000Kg/m3.
Where g is grams; mL is milliLitres
Wiki User
∙ 11y agoWater density is 0.997 kg/L at 25 oC. it is also normal to considered a figure of 1.0 kg/L as standard density.
Wiki User
∙ 15y ago1.0
Wiki User
∙ 13y ago1000 kgm-3
Wiki User
∙ 13y ago.998 g/cm^3
Add your answer:
Earn +20 pts
Which has higher density salt water or fresh?
Salt water has a higher density than fresh water. Fresh water is only made up of two things, hydrogen and oxygen. Salt water is made up of hydrogen oxygen sodium and chlorine, which gives it a higher density.
Does freshwater have a lower density than salt water?
Yes, fresh water has a slightly lower density than salt water.
Why does an egg sink in fresh water but float in salt water but stays in the middle when pour water into salt water?
Eggs, water, floating.An egg doesn't float in fresh water but since salt water is more dense than fresh water, it has a better chance of floating in the salt water. The greater buoyant force allows the egg to float in the salt water, if salty enough.More explanationAn egg sinks in fresh water but not in salt water because fresh water is not as dense. In order for something to float, the buoyant force has to be greater than or equal to the weight of the object. The buoyant force is equal to the weight of the liquid that is displaced by the object. To figure out the weight of the water displaced you multiply the density of the water by the volume and then multiply that by gravity. The density of the fresh water is less than the density of the salt water, therefore the weight of the water displaced will be greater in the case of the salt water, resulting in a greater buoyant force.The more salt in water the more bouyant an object becomes. The salt makes the water more denser. Check out the dead sea. Most salt content in any lake or sea. The density of the salt water is greater than the density of the egg. Items sink if their own density is greater than the density of whatever they are trying to float in. Items float to the top if their density is less than the density of what they are floating in, and items hang in the middle if the densities are the same. Adding in the salt gives the water a greater density than the water did had before, so the egg doesn't float in freshwater.Did you know?A fresh egg will sink in fresh water but it will float in salty water. A rotten egg will float in fresh water.
How much salt do you put in salt water to make it denser than fresh water?
Any amount of salt added to fresh water will increase its density as it dissolves. However, this difference will be negligible for very small amounts of salt. Seawater density is typically around 1.025 g/ml, indicating 2.5g of salts dissolved in 1kg of water. A saturated solution of Sodium Chloride in water contains approximately 360g of salt per kilogram of water, giving a density of 1.360g/ml. Solubility and density are both affected by temperature and pressure, so these figures are guidelines only.
What body of water has the lowest density?
Surface mixed zone
What is the densities of fresh water and salt water?
Salt Water Density: 1.027 g/mL Fresh Water Density: 1 g/mL
Why sea water and freshwater do not have same density?
Sea water typically has a higher density than freshwater because it contains more dissolved salts and minerals. These dissolved substances add mass to the water, increasing its density. Temperature and pressure also play a role in affecting the density of water.
Why does freshwater float on saltwater?
Salt water is denser hence HEAVIER then fresh water, Salt Water has a density of 1.02g/ml and Fresh Water has a density of 1.00g/ml.
Which has higher density salt water or fresh?
Salt water has a higher density than fresh water. Fresh water is only made up of two things, hydrogen and oxygen. Salt water is made up of hydrogen oxygen sodium and chlorine, which gives it a higher density.
Which is lighter fresh or salt water?
Fresh water (of the same temperature) has the lower density ('lighter').
Why does a grape float on salt water and not fresh water?
the density
Who will survive Drowning in salt water versus fresh water?
Generally, a person is more likely to survive drowning in fresh water compared to salt water. This is because salt water is denser than fresh water, which can make it more difficult to float and breathe. Additionally, ingesting salt water can lead to dehydration and other health complications.
Does Egg Float In Salt Water Or Fresh Water?
Fresh eggs float in salt water because the density of salt water is more than the density of the egg. But fresh eggs do not float in fresh water because the density of water is less than that of the egg. Salt increases the density of water.
What is the density of water at sea level?
At sea level, fresh water has a density of 1. 0 grams per milliliter. Seawater has a higher density than fresh water, 1. 025 g/ml.
How do you know if an object will float or sink in fresh water?
It depends on the density of the object. If an object is denser than fresh water, it will sink. If it is less dense than the fresh water, it will float.
Does salt water have a lower density than water?
Yes, fresh water has a slightly lower density than salt water.
How would you tell tap water and seawater apart?
The density of the fresh water is less than the density of the salt water.
