.9975g/mL
Water is at a minimum temperature when it is frozen, which is 0 degrees Celsius or 32 degrees FahrenheitFrom my high school memory, I recalled that water has minimum volume when at 4 degrees Celcius. This is why it is able to penetrate rocks as it is cooling and then crack them apart once it freezes again.Then I found this site http://www.simetric.co.uk/si_water.htmwhich statesAt 4°C pure water has a density (weight or mass) of about 1 g/cu.cm, 1 g/ml,1 kg/litre, 1000 kg/cu.m, 1 tonne/cu.m or 62.4 lb/cu.ftandWhen water freezes it expands rapidly adding about 9 % by volume. Fresh water has a maximum density at around 4° Celsius. Water is the only substance where the maximum density does not occur when solidified. As ice is lighter than water, it floats.
The density of bitumen is about 1 tonne per cubic metre at 20 deg C.. The same as water
If the density of titanium metal is 4.51 g per cm cubed at 25 degrees C, the mass of titanium that displaces 65.8 ml of water at 25 degrees C would be 29.7 g.
Water is most dense at +4 deg centigrade. When it freezes it becomes lighter.
0.7954 at 15 C
At 25 degrees C the density of water is 1.0 g/mL. If the temperature of the water goes above 25 degrees C the density will drop. If the temperature of the water goes below 25 degrees C the density will rise.
The density of water at 27.3 degrees C is 0.996429 g/cm3.
4° C is the temperature of maximum density for water. Change temperature in either direction from there -- whether you warm it or cool it -- the density decreases.
Cool the water down to 4 degrees C. Water is at its densest at 4 degrees, which is why the bottom of lakes will almost always be 4 degrees.
the density of water at 40 degrees C is 0.992g/mL. What is the volume of 2.27g of water at this temperature?
Water is most dense at 4oC. At this temperature it has a density of 1000 kg/m3
Water at -20 degrees Celsius; heat will expand matter, so at +40 degrees Celsius, water would have less density. * * * * * That would be true if there were no phase change. Unfortunately for the above answer, water freezes at 0 deg C and that phase change is accompanied by an expansion. As a result, water at 40 deg C is denser that water (ice) at -20 deg C.
Water is at a minimum temperature when it is frozen, which is 0 degrees Celsius or 32 degrees FahrenheitFrom my high school memory, I recalled that water has minimum volume when at 4 degrees Celcius. This is why it is able to penetrate rocks as it is cooling and then crack them apart once it freezes again.Then I found this site http://www.simetric.co.uk/si_water.htmwhich statesAt 4°C pure water has a density (weight or mass) of about 1 g/cu.cm, 1 g/ml,1 kg/litre, 1000 kg/cu.m, 1 tonne/cu.m or 62.4 lb/cu.ftandWhen water freezes it expands rapidly adding about 9 % by volume. Fresh water has a maximum density at around 4° Celsius. Water is the only substance where the maximum density does not occur when solidified. As ice is lighter than water, it floats.
Above 4 degrees C, the hotter it is then the less dense.
23 degrees Celsius = 73.4 degrees Fahrenheit.
23 degrees Celsius = 73.4 degrees FahrenheitFormula: [°F] = [°C] × 9⁄5 + 32
Pure water achieves maximum density at 3.98 °C.