0
To remove outside rear view mirror. The safe thing to do is disconnect the battery first (I don't) 1-remove door panel, this is done by first removing 7 screws that retain the door panel. two of the screws are hidden under a plastic flap that is in the bottom of the finger hold in the door panel, one is on the back edge of the door panel, towards the top of the panel, three are along the bottom of the door panel. the last one is behind the plastic part that surrounds the inside door handle--pry it towards the rear, and pop it out. after the screws are out you have to carefully pull the panel away from the door, there are a variety of plastic clips that you pull out to get the panel loose. once the panel is loose have something to sit it on to keep it from dropping down. unplug the electrical connector that goes to the mirror next you need to pull the front of the inside window garnish away from the door. this will expose holes in the door frame, through which you can remove the nuts that hold the mirror onto the door (I think there are three) Pull the mirror and cable away from the door. Hope you didn't break to many plasic pieces.
What else can I help you with?
How can a plane mirror ray diagram be used to illustrate the reflection of light?
A plane mirror ray diagram can be used to show how light reflects off a mirror. It helps visualize the angle of incidence being equal to the angle of reflection, and how the reflected rays form an image.
How do you replace the water pump on a 1988 Lincoln Town Car?
start by takingoff the fan belt. then remove the fan, lossen the alternator slide it to the side out of the way, remove the smog pump (under the a/c compressor)may or may not have to remove power steiring pump.now you shouldbe able to remove the water pump, or5 for a more complete diagram buy a repair manuel form a auot parts store.
The following diagram shows an image formed in a concave mirror.?
A concave mirror is a curved mirror with reflective surface facing inward. It can form both real and virtual images depending on object distance and focal length. The image formed by a concave mirror can be upright or inverted, magnified or diminished, depending on object position relative to the focal point.
What is the Possessive form of reflection of a mirror?
mirror's reflection
What is the possessive form of reflection of the mirror?
mirror's reflection
Which lens will form exact mirror image?
concave lens will form exact mirror image.
Why does fog form on your mirror?
Due to the difference in the temperature, the molecules form a layer on the mirror ! That is what we call Fog !
What type of mirror can be used to form a magnified image?
concave mirror
How to draw a ray diagram for a concave mirror?
To draw a ray diagram for a concave mirror, follow these steps: Draw the concave mirror as a curved line with a focal point (F) in the middle. Draw the object (usually an arrow) outside the mirror, beyond the focal point. Draw three rays: one parallel to the principal axis that reflects through the focal point, one through the focal point that reflects parallel to the principal axis, and one that goes through the center of curvature and reflects back on itself. Where the reflected rays intersect is where the image will form.
What is the possessive of relection of the mirror?
The possessive form of "reflection of the mirror" can be phrased as "the mirror's reflection." This indicates that the reflection belongs to or is produced by the mirror.
Can a plane mirror form real and inverted image?
No, a plane mirror can only form virtual and upright images. The image produced by a plane mirror appears to be behind the mirror, the same distance as the object in front of the mirror, and is always the same size as the object.
How can you remove an old message only visible when fogged up from your bathroom mirror?
The message appears because the oils on your finger causes the condensation to form at different temperatures than uncoated glass. To "erase" a message, wash the mirror with Windex.
