Based on the Crystal used in the circuit, and the divisor selection, the processor clock frequency is obtained the tick time is the min clock cycles required to do a nop operation
Bus Clock is based on the System Clock. In other terms Bus Clock is derived from system Clock. Bus Clock is usually half System Clock. (Busy Clock = System Clock / 2)
With pipelining, the CPU begins executing a second instruction before the first instruction is completed. Pipelining results in faster processing because the CPU does not have to wait for one instruction to complete the machine cycle. The system clock is a small chip that the control unit relies on to synchronize computer operations. The faster the clock, the more instructions the CPU can execute per second. The speed at which a processor executes instructions is called clock speed. Clock speed is measured in megahertz (MHz), which equates to one million ticks of the system clock.
Analog is displayed in a clock like instrument digital is shoun in numbers
ticking over and getting a new no. like do the clock or some type of speedometer...
The crystal frquency in an 8085 system is twice the desired clock frequency, so a crystal of 2.2 MHz is required to operate at 1.1 MHz.Note: Clock frequency is not the same as instructions per second, because the instructions in an 8085 take a variable number of clock cycles, between 4 and 18, to execute.
Bus Clock is based on the System Clock. In other terms Bus Clock is derived from system Clock. Bus Clock is usually half System Clock. (Busy Clock = System Clock / 2)
The T2130 is a 32 bit Processor; the T2330 is a 64 bit processor. Another difference is the clock speed: the T2130 has a 1.86Ghz speed and the T2330 has only 1.6Ghz. Hope this helps! Vonpopa
The difference between 2.66 dual core processor, and 64-bit dual core processor, is really two different processor specifications. 2.66 is actually 2.66Ghz, which is the clock speed of the processor. The clock speed tells you how many times the processor can execute instructions per second. A dual core processor is a processor with two cores on one die. This can be thought of as having two processors in one. The bit specification of a processor tells you how many binary instructions a processor can execute per clock cycle. Most processors today are 32-bit (32 binary instructions per clock cycle) or 64-bit (64 binary instructions per clock cycle). More RAM can be used with a 64-bit processor. A 32-bit processor is limited to addressing 4 Gigabytes of RAM, while a 64-bit process can address (theoretically) 16 Exabytes of RAM.
The number of clock cycles per minute which determines the spped of le system
system clock
The pace of the system clock, called the clock speed, is measured by the number of ticks per second. The faster the clock speed, the more instruction the processor can execute per second.
No, the system clock is not the heart of the computer but the micro-processor. The basic characteristics that differentiate the micro-processors includes the instruction set, bandwidth, and the clock speed.
AnswerThe internal is located inside your computer. If your running Windows, the time it keeps is display on the lower right side of the screen. An external clock is usually located on another system and can be accessed with software. You can get software to sync your internal clock to that other system. The National Institute for Science and Technology (NIST) hosts a clock that many computer users and businesses sync to.Wow...can that answer be any more wrong?Internal and External clocks are NOT referring to the "time of day" type clocks, they refer to the internal processor clock cycle or an external clock source. The clock cycle of a processor is the time it takes for the processor to execute a data instruction (very basic explanation there) and is measured as the speed of a processor, like a 2.6gHz processor can execute 2.6 billion clock cycles per second.Now this is somewhat misleading as the processor speed itself is probably only 400MHz, but using an External Multiplier (clock multiplier, external clock), you increase the total amount of data the processor can execute in one clock cycle.This is a VERY basic example and I don't have time to really go deep, so it's best to search for a more concise answer if you really require one.
go in to device manager and look under processor
The difference between a clock and a watch is a watch is worn on the wrist, and a clock is something around your home to look at to tell the time.
days
The processor RAM Cach clock speed ranges between 3.3 to 4.00 GHz.