pig tail joint
rattail joint
plain tap or tee joint
-_-
etc.......
AnswerBoth terms describe connections between conductors. The term 'splice' tends to be used in North America, whereas the term 'joint' tends to be used in the UK. For high-voltage cables, the tradesmen are known as 'splicers' (North America) or 'jointers' (UK).
there are many types of electrical splices.but the most common splices are pigtail splice,western union(long and short),rat tail splice,solid to stranded,double cross,etc.
rattail
western union splice
fixture splice
knotted lap
.......and more
A electrical joint and splice is the altered wire split and reconnected to new wires. An example would be a wire connecting to a terminal such as a switch or receptacle.
Totally important!The connections must be well made and the wires tightly joined to prevent a loss of voltage to the device powered. In high current situations a poor connection causes heat at the connection and oxididaion of the wires and no more or intermittent connections.Most problems in electrical is not a short but: an open connection.Additional AnswerIn the case of high-voltage underground cables, the restoration of the insulation is critically important, as is restoring the cable's waterproof integrity. The skills required are such that cable jointers serve a full apprenticeship in that particular trade.
western union short/ long ordinary tee joint ordinary cross joint over lap tee joint over lap cross joint trough fixture joint rat tail joint double cross joint double tee joint bouble over lap cross joint multitap rat tail joint --well, I'm not sure about that!
kinds of electrical relays
Sound -> Electrical (microphones)Force -> Electrical (Load Cells)Kinetic -> Electrical (piezoelectric, generators)Light -> Electrical (solar panels)Thermal -> Electrical (thermocouple)Electrical -> Kinetic (Motors)Electrical -> Magnetic (electromagnets)Electrical -> Optical (lightbulbs, LEDs)Electrical -> Thermal (heaters)Electrical -> Audio (speakers)*(see the related link below for more information)A device that converts variations in a physical quantity, such as pressure or brightness, into an electrical signal, or vice versa.
Gluing splices is the common way to lay pad for carpet.
plain tap or tee joint is one of the types of of electrical wire splices and joints
mecanical and fusion
Connecting wires in electrical terms is called an electrical splice. All electrical splices have to be made in a junction box.
sigurado akong nagsesearch din classmates ko ngaun.hahahahahahahah nek nek
The four types of splices and joints are the Western Union splice, tap splice or tap joint, fixture splices or fixture joints, and rattail joint. The most common among the four wire splices is the Western Union splice.
The long splice, the short splice, the end splice, and the eye splice are probably the most commonly used types.
A splice usually refers to joining wires in some fashion. Someone could refer to a splice as an electrical joint, but term joint might be better applied to an electrical terminal or connection point.
There are many different types of electrical materials most of which are types of metals. The most common electrical material is copper.
Some common types of electrical splice:Rat-tail, Western Union, fixture, knotted tap, staggered splice.Some common types of electrical joint:Screw terminals, braided eyelets, crimps, sty-cons, plugs and sockets, insulated screw connectors, wire clip connectors (wire push-ins), twists inside wire nuts, plain wire soldered joints, soldered wire joints to posts and soldered legs for integrated circuits on printed circuit boards.
It contains 50 cuts and 77 different camera angles.
Sprockets and Splices - 2009 was released on: USA: 1 January 2009
Butted Splices: Western Union splice for small gauge solid conductors. Multi-conductor cables should utilize staggered splices to decrease the bulk of the jointed area. Rat tail joints are can also be used for solid conductor cables, and are most commonly seen with electrical branch wiring. A naked joint is not very strong. Wire nuts are used as protective covers for these joints, and also provide a mechanical connection for added strength. A fixture joint is also commonly seen in electrical branch wiring where wires of different diameters must be joined together. Split bolt splices are simple mechanical joints normally reserved for residential and commercial grounding conductors, but can be seen in some larger commercial industrial locations or a residential service entrance. Running Splices: A Knotted tap joint is used to connect a branch wire to a continuous wire.