3.2.2 Dimensions. The minimum effective length and the throat end opening diameter of the fabric windsock are as follows: a. Size 1 ‑ Eight feet (2.5 m) in length and 18 inches (0.45 m) in throat diameter. b. Size 2 ‑ Twelve feet (3.75 m) in length and 36 inches (0.9 m) in throat diameter. The taper or the fabric windsock from the throat to the trailing end must be designed to cause the windsock to fully extend when exposed to a wind of 15 knots (28 km/hr or 17 mph).
finished out dimensions are 8"x8"x16" basic dimensions of a concrete block are 7-5/8"x7-5/8"x15-5/8"
20" x 30" x4"
8"x8"x16"but the blocks themselves actually measure 7 1/2x 15 1/2 (+/-)to allow for the mortar joint.
Revit can't create running dimensions because it is a stupid piece of crap.
i belive it would be 100meters high and 50meters left to right
a windsock from japan
A fully extended standard windsock, per FAA standards, means the wind is at least 15 knots or 17 MPH.
KT Tunstall's Acoustic Extravaganza was created on 2006-05-15.
Generally windsock do narrow towards the free end
So the wind passed through and moves the windsock in the direction the wind is blowing.
Wings for Roger Windsock - 1947 was released on: USA: 1947
At airports.
a Chinese windsock
it was invented in 1432
Windsocks are often used at airports to indicate the direction and strength of the wind.A standard windsock has white and orange stripes
15 pounds of 24 kt. gold
It shows wind direction.